gundam modelleme veritabanı | depo yöneticisi

Russian T-50 Infantry Tank

HobbyBoss | No. 83827 | 1:35

Boxart T-50 Infantry Tank 83827 HobbyBoss

Gerçekler

Marka:
HobbyBoss
Başlık:
Russian T-50 Infantry Tank
Numara:
83827
ölçek:
1:35
tip:
Tam kiti
Yayınlandı:
2015 Yeni araç
Barkod:
6939319238276 (EAN)
konu:
T-50 » Tanklar (Araçlar)

Kutu içeriği

boyutlar:
300x220x50 mm (11.8x8.7x2 inch)

Ağırlık:
370 g (0.82 lbs)

tarafından tasarlanan Boxart Vincent Wai

Ürün zaman çizelgesi

 
HobbyBoss
Tam tarih »

Pazaryeri

No partner shops available

Kutu içi incelemeler

Dış incelemeler
reklâm
Armorama
Kutu içi inceleme
Armorama
Missing-Lynx
Kutu içi inceleme
Missing-Lynx
gözden geçirmek ArmourMaster

Tüm incelemeler » (5 toplamda)

Dergiler

(Scale Military Modeller Vol 48 Issue 566)
Scale Military Modeller | Vol 48 Issue 566
English (TOC: 11 lines)
May 2018

Yorumlar


26 January 2025, 19:19 -
Ron Garcia
Not a ton of parts but a very tricky - and frustrating - build. The drive sprocket was too narrow for the tracks. I was able to pry both apart a bit after I had completed them and press the individual track links onto the teeth as the cement on the track links slowly dried. I didn't dare pull the sprockets out afterward since I figured I wouldn't have much chance placing them back in exactly as I had them. I glued them in at that point and painted them attached to the completed tracks (not my preferred method). Speaking of which, the individual track links were a pain! I get the realism point of view, but gluing tiny guide teeth onto each tiny track link is not very fun - and this is a hobby we do for fun, right? I glued them on while the track links were still on the runners to make it easier to handle and then I removed the links a day later. The rest of the build was relatively quick as there wasn't much on the exterior of this tank. However, there were two other issues that bogged things down. The first was the PE grill covers. They are too short. There was no way I was going to use the injection molded ones as they were solid. Using them as a form, I bent the PE. No matter how much I fiddled with them, either the front or the rear was going to come up short. I chose the front and glued a small piece of styrene to the front of the grills so they extended to the opening. About 2mm so not that noticeable. Make sure to paint the inside of the tank or the tan plastic is sure to be seen. The second issue was the string of bolts next to the turret mantlet. This part is a thin piece of plastic that is supposed to be bent around a previously attached piece in an almost half moon shape. Two are needed and four are provided. Lucky! The plastic was thin so I thought maybe it might be pliable enough to easily bend. Snap! Almost an instant break. Very brittle plastic. I applied a lot of cement to the back hoping to soften it. Nope. I boiled it in water for a long time. Nope. I held it over a burner with tweezers and just when nothing seemed to be happening, it curled. To the left. But it bent! Anyway, I ended up using all four pieces, all four snapped, all four curled from the heat, but I was able to salvage enough from the burner experiment that I was able to secure the strips onto the mantlet sides. Using some putty, I make it look good enough. The rivets aren't parallel to the ones on the other side since I kind of had to Frankenstein's Monster them together, but it's not really noticeable. Maybe a hair dryer might have worked better. Anyway, other than those issues - and make no mistake - they are pretty major, the kit looks good when finished. It looks like a mini T-34. This is my last Hobby Boss kit for a while having built a ton of their Soviet tanks in a row starting with their T-18. I'd have to say this was the most frustrating one. Honestly, while all the others had some issues, I'd recommend any of them. Not so with this one. I do not recommend this kit. Lots of frustration. It's certainly not for the beginner. Mine came out looking very nice, but it wasn't a fun build. For completists only!
24 November 2019, 03:07
Olivier
Thanks! Will keep well clear of this T50.
 24 November 2019, 09:29

Projeler

15 Görüntüler
In Progress PicsView album, image #1
1:35
1:35 T-50 Infantry Tank (HobbyBoss 83827)
8 Görüntüler
T-50View album, image #1
1:35
1:35 T-50 Infantry Tank (HobbyBoss 83827)
3 Görüntüler
Zvezda Lavochkin la-5F (kitbash La-5 and La-5FN)View album, image #1
1:35
1:35 T-50 Infantry Tank (HobbyBoss 83827)1:35 Tracks for T-50 (MasterClub MTL35063)1:35 T-50 (Miniarm B35030)
25 Görüntüler
T-50 1:35 Hobby BossView album, image #1
1:35
1:35 T-50 Infantry Tank (HobbyBoss 83827)1:35 45mm 20K Barrel (1932/34 Prod). (Magic Models MM3550)

galeri

T-50 1:35
T-50
HobbyBoss 1:35
tarafından AKK üzerinde Pienoismallit
T-50 1:35
T-50 Finnish Army
HobbyBoss 1:35
tarafından Sungjun Jang üzerinde Panzer Modell

Referans materyali

Т-50. Лучший легкий танк Великой Отечественной (Eksmo )
T-50 (Wydawnictwo Militaria 283)
T-50
No. 283
aleksander czubaczin
2007

Tüm geziler » (3 toplamda)