Soviet 2A3 Kondensator 2P 406 mm Self-propelled Howitzer

Trumpeter | No. 09529 | 1:35

Boxart 2A3 Kondensator 2P 406 mm Self-propelled Howitzer 09529 Trumpeter

Fapte

Marca:: Trumpeter
Titlu:: Soviet 2A3 Kondensator 2P 406 mm Self-propelled Howitzer
Număr:: 09529
Scară:: 1:35
Tip:: Kit complet
Eliberată:: 2018 Instrumentul nou
Cod de bare:: 9580208095295 (EAN)
ambalare:: Casetă rigidă (deschizător de vârf)
Subiect:: 2A3 Kondensator 2P » Artilerie autopropulsată (vehicule)

Conținutul cutiei

Sprue din plastic, Fret fotografiat, Fișă de calcul (alunecare de apă)

Dimensiuni:
450x290x90 mm (17.7x11.4x3.5 inch)

Greutate:
1046 g (2.31 lbs)

Boxart proiectat de Vincent Wai

Cronologie produs

Trumpeter

2018

Instrumentul nou

Istorie completă »

Instrucțiuni

Descarca 2297Kb (.pdf)

Piata de desfacere

No partner shops available

In-box recenzii

Recenzii externe

Publicitate

Recenzie în cutie

IPMS Deutschland

Recenzie în cutie

Modellversium

Recenzie în cutie

Armorama

Revizuire Nigel’s Mustang and Models

Toate recenziile » (5 in total)

Comentarii

Treehugger
Btw, I counted the track links. 12 sets of 18, for a total of 216, or 108 on both sides. Build guide states the kit requires 101 track links on each side, so there is apparently 7 spare track links on each side. 🙂

The tracks are not moving and have to be glued in place. No ejection pin marks what so ever. There are four stubs for each track link that has to be cleaned up.

6 September 2021, 09:51

Aleksandr Kharkov
This model must by 570 mm long. Have anyone enough free space for it? Heh

12 March 2018, 11:06

THE BEAST
You're wrong. This is length of 2B1 "Oka" (made same time as Kondesator) copied on most sites. Just compare photos.

28 August 2018, 15:40

Rex
hmm, 20+ inches long for that model would seem just about right, Aleksandr. You and I both see about 8 or more inches for the vehicle, plus about a foot for the barrel.

28 August 2018, 16:08

THE BEAST
No. Diameter of road wheel is 550mm. So you can easily calculate length from photos: about 13-14 meters. So model will be about 400 mm length.

29 August 2018, 15:05

Rex
"43 cm" is on the box, according to the review posted on Scalemates. So, yeah, wayyyy smaller than Aleksandr's joke,,,,,,,geez. (but, 3 cm longer than the "correcting Beast" )

29 August 2018, 15:26