M915 Truck
Trumpeter | No. 01015 | 1:35
faktat
- Brändi:
- Trumpeter
- otsikko:
- M915 Truck
- Määrä:
- 01015
- asteikko:
- 1:35
- Tyyppi:
- Täysi pakkaus
- julkaisi:
- 2017 Uusi työkalu
- Viivakoodi:
- 9580208010151 (EAN)
- Pakkaus:
- Jäykkä laatikko (ylempi avaaja)
- Aihe:
- M915 » Kuorma (ajoneuvot)
merkinnät
M915
US Army (1784-now)
Laatikon sisältö
Muoviset ruuvit (Light gray), Valokuvanäköinen raivostuminen (Brass), Kumi (Black), Tarra-arkki (vesiliukumäki) (Multi-colored), Ohjeet (paperi) (Black & white), Ohjeet (paperi) (Multi-colored)
Mitat:
470x290x95 mm
(18.5x11.4x3.7 inch)
Paino:
1251 g (2.76 lbs)
Boxart suunnittelija Vincenzo Auletta
Mikä on laatikossa »Tuotteen aikajana
Trumpeter
Ohjeet
ladata 3307Kb (.pdf)
markkinat
No partner shops available
In-box-arviot
Ulkoiset arvostelut
Mainos
Arvostelu HIgh Altitude Scale Modeling
Kaikki arvostelut » (4 yhteensä)
aikakauslehdet
Kommentit
AndrewG
The instructions for the container for this kit from Trumpeter are wrong. It's a minor detail, but if you look at the real thing you will see the error. The step two part 4's are mirrored for each door, in fact they both go the same way for each door, the big lug towards the center for each part 4. This means that parts A12 and A13 are also wrong, you have to cut the plate that the handle connects to off and glue it on the opposite side then rotate the part 180 degrees so that both A10 and A12 are the same on the left door and A11 and A13 are the same on the right door. Other than that it is a great kit that fits together well. The 20' kit and the containers that come with the M915 Truck and the HEMTT M1120 are the same so I'll put this comment on those pages too.
The instructions for the container for this kit from Trumpeter are wrong. It's a minor detail, but if you look at the real thing you will see the error. The step two part 4's are mirrored for each door, in fact they both go the same way for each door, the big lug towards the center for each part 4. This means that parts A12 and A13 are also wrong, you have to cut the plate that the handle connects to off and glue it on the opposite side then rotate the part 180 degrees so that both A10 and A12 are the same on the left door and A11 and A13 are the same on the right door. Other than that it is a great kit that fits together well. The 20' kit and the containers that come with the M915 Truck and the HEMTT M1120 are the same so I'll put this comment on those pages too.
27 May 2021, 04:46
projektit
Viitemateriaali
M915 early variants AM General-built Trucks of the M915 Family in the US Army / ...
American Special No. 3033
Carl Schulze
2018 Kaikki kulkureitit » (3 yhteensä)