SCM Australian Trucks Groupbuild
- 1
- 2
February 22, 2020
A bleach bath didn't work, so oven cleaner it is
- 3
February 22, 2020
Spraying the stuff didn't work as hoped, bathing it is
- 4
February 22, 2020
One side works perfect.
- 5
February 22, 2020
After drying, this residue returns....
- 6
February 22, 2020
Testing 123 in a sealed bag
- 7
February 22, 2020
Result is.... disappointing
- 8
February 22, 2020
Als parts taking a bath
- 9
February 22, 2020
In the meantime, clean up time
- 10
February 22, 2020
This will become a thingy to connect to the part to form another thingy?
- 11
February 22, 2020
Overnight Mr Muscle Oven cleaner bath
- 12
February 22, 2020
No dice!
- 13
February 22, 2020
Tried Bozzer's advice: brake fluid, bleach, brake fluid. Result is this
- 14
February 22, 2020
I. Am. Getting. Desperate!
- 15
February 29, 2020
New kit on the dock
- 16
February 29, 2020
Brake fluid & bleach
- 17
February 29, 2020
It’s green!
- 18
February 29, 2020
After rinsing
- 19
February 29, 2020
Looks okay?
- 20
February 29, 2020
Could it be?
- 21
March 15, 2020
I use plastic bags for sorting. From left to right: Cut, sanded, polished with pads, machine polished
- 22
March 15, 2020
Been busy for a bit
- 23
April 12, 2020
Let me sleep on it
- 24
April 12, 2020
Cut off the spoiler
- 25
April 12, 2020
Filled with sprue glue
- 26
- 27
- 28
- 29
- 30
April 12, 2020
Still some bubbles in the sprue glue
- 31
April 18, 2020
Before polishing
- 32
- 33
- 34
April 18, 2020
One done, one to go
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
April 26, 2020
Glued some chassis parts
- 43
- 44
April 26, 2020
My can also needed some putty
- 45
April 26, 2020
But not much
- 46
April 26, 2020
Lots of mold lines on the bull bar
- 47
April 27, 2020
Added some sprue on the back for the clips to bite in.
- 48
April 27, 2020
Some primer on the floor and the shelves
- 49
April 27, 2020
Shelves will be rough bare aluminium
- 50
April 27, 2020
Chrome on the rims
- 51
April 27, 2020
And the bull bar
- 52
- 53
April 27, 2020
With the round black thingies around the rims
- 54
May 9, 2020
Base layer for the sleeper. Diarrhoea anyone?
- 55
- 56
- 57
- 58
- 59
- 60
May 9, 2020
I like how the fabric came out in the blanket
- 61
May 9, 2020
Glued the back to the door panels
- 62
- 63
- 64
May 9, 2020
Definitely blue
- 65
June 6, 2020
Dry fit to glue the roof to the front
- 66
- 67
June 6, 2020
Aluminium trays as well
- 68
June 6, 2020
The sprue glue stayed uneven
- 69
- 70
June 6, 2020
AC tinted with metallic pigment
- 71
June 6, 2020
Polished once more
- 72
June 6, 2020
Thank you mr Hardy for the idea!
- 73
- 74
- 75
- 76
June 7, 2020
Orange over black primer
- 77
June 7, 2020
Orange over white primer
- 78
June 9, 2020
More colour! Needs an extra layer though
- 79
June 9, 2020
More colour! Needs an extra layer though
- 80
June 9, 2020
I nicked the bonnet, needs a stripping and a do over
- 81
November 20, 2020
Yellow top and brown bottom sprayed
- 82
November 18, 2020
Do over done!
- 83
November 20, 2020
After unmasking, I used an 1mm Molotow pen. I need practice 🙁
- 84
January 2, 2022
Ejector pin marks everywhere! Putty to the rescue!
- 85
- 86
January 3, 2022
All this mess is from cleanup of 1 part…
- 87
January 3, 2022
Two chassis beams cleaned, sanded and glued. About 2 hours work
- 88
January 3, 2022
Chassis all glued up
- 89
January 3, 2022
The diamond tread plates are dry fit after cleaning and sanding
- 90
March 7, 2022
These lights will go
- 91
- 92
March 7, 2022
Some aftermarket stuff for improvement
- 93
March 7, 2022
Vertical parts cleaned up.
- 94
March 7, 2022
What do these dental sticks have to do here?
- 95
March 7, 2022
The caps are needed!
- 96
March 7, 2022
Glueing, clamping and sanding
- 97
March 7, 2022
Tadaa! Homemade air tanks!
- 98
March 7, 2022
These will come in handy
- 99
March 7, 2022
Added the small black connectors to the lifting cilinders
- 100
March 7, 2022
Added some steel brake lines through the chassis
- 101
March 7, 2022
Dry fit of the homemade air tanks
- 102
March 7, 2022
And the last bit to the junction box
- 103
March 7, 2022
There will be 2 air hoses for each brake. A feed line and a return/actuator line.
- 104
March 25, 2022
Time to stop fooling around with dryfitting!
- 105
March 25, 2022
Degreasing is a challenge
- 106
March 25, 2022
So is drying
- 107
March 25, 2022
White primer on top
- 108
- 109
- 110
March 25, 2022
Molotow chrome on the wheels
- 111
March 25, 2022
Grey primer on the underside
- 112
- 113
- 114
March 27, 2022
No guesses as to the colour
- 115
- 116
March 27, 2022
Primer colour does matter. Underside in grey on the left, topside in white on the right
- 117
March 28, 2022
All that’s left of my yellow
- 118
- 119
- 120
- 121
April 3, 2022
Final assembly started!
- 122
April 3, 2022
What a difference a wash makes
- 123
April 3, 2022
Brake lines installation
- 124
April 3, 2022
On her wheels!
- 125
April 3, 2022
Weight to help the glue set
- 126
April 3, 2022
A drop of weathering
- 127
April 3, 2022
Dry fit of the upper deck
- 128
April 3, 2022
Dry fit of the whole thing
- 129
April 3, 2022
Cutting chains to length
- 130
April 3, 2022
Hydraulics installation
- 131
April 10, 2022
Hydraulics installed
- 132
- 133
- 134
- 135
- 136
- 137
April 10, 2022
Shoddy maintenance
- 138
- 139
- 140
April 10, 2022
Leaks everywhere
- 141
April 10, 2022
Kit in inself
- 142
- 143
- 144
- 145
April 10, 2022
Upper deck chains installed
- 146
May 29, 2023
Trying to get this build running again
- 147
- 148
- 149
- 150
October 30, 2024
More sanding and cleaning.
- 151
October 31, 2024
Primer! Surfacer 1200
- 152
- 153
October 31, 2024
Tamiya bright gun metal
- 154
- 155
November 1, 2024
More parts prepped
- 156
November 1, 2024
White primer for the yellow
- 157
November 1, 2024
Some more primer on resented parts
- 158
November 1, 2024
Some black
- 159
November 1, 2024
And yellow!
- 160
November 3, 2024
Custom paint job on the sleeper
- 161
November 3, 2024
Making fest
- 162
November 3, 2024
The plot thickens
- 163
- 164
November 3, 2024
License plate
- 165
November 3, 2024
Mr surfacer black 1500
- 166
November 3, 2024
Revell chrome. Decanted and thinned with slt. 50-50
- 167
- 168
- 169
November 11, 2024
The tank is coated with Alclad aqua gloss, the rim isn’t
- 170
- 171
November 11, 2024
These take a lot of time and patience
- 172
November 11, 2024
She’s on her wheels
- 173
- 174
November 11, 2024
The small tanks underneath the chassis make mounting the large tanks hard.
- 175
November 11, 2024
Starting to look okay
- 176
November 11, 2024
And then I quit for the day. The radiator sits too high for the bonnet to close
- 177
November 11, 2024
Now it closes
- 178
November 11, 2024
A very elegant solution
- 179
November 11, 2024
I’m done
- 180
- 181
- 182
- 183
- 184
November 11, 2024
In its rightful place
- 185
- 186
- 187
- 188
- 189
评论
13 November 2024, 19:18 -
Album info
Please register your builds here:
scalemates.com/events/event.php?id=11592
Participating are (in random order):
Tom …
scalemates.com/profi..bums&album=54804
Chris Greathouse
scalemates.com/profi..bums&album=54837
Nathan Dempsey
scalemates.com/profi..bums&album=52357
Danny Meer
scalemates.com/profi..bums&album=55204
Bozzer
scalemates.com/profi..bums&album=55234
Peter
scalemates.com/profi..bums&album=55484
Yours truly
scalemates.com/profi..bums&album=52388
198 图片
1:24
已完成
Group Build
所有相册
查看所有相册 »