F-100D Super Sabre WIP
1
November 24, 2017Dual build with my F4D Skyray.2
November 24, 2017Kit parts3
November 24, 2017Aftermarket stuff4
November 24, 2017More aftermarket stuff5
November 27, 2017First time ever with resin6
November 27, 2017Mind the gap!7
November 27, 2017After removing the locator pins for the original cockpit, there’s less to sand.8
November 29, 2017That Proxxon burr is great! Neat fit in half an hour. No tailsitting allowed. Added 8mm steel ball to the nos9
November 29, 2017Some PE on the dash10
November 29, 2017PE in 1/72 is tiny11
November 29, 2017Various tiny bits12
December 2, 2017Surgery for the canopy frame to fit13
December 2, 2017Mmm. Room to spare to the front or to the rear?14
December 6, 2017Decided I'm going with an open canopy to show the aires pit. So I cut the one piece canopy in two. Feeling bold I also sanded off the frame that shouldn't be there....15
December 6, 2017After polishing it looks fine to me!16
December 9, 2017PE detail on front wheel strut & canopy halves.17
December 9, 2017Cockpit primed black.18
December 9, 2017Inside of fuselage as well.19
December 9, 2017Wings glued. Dry fit on the fuselage.20
December 11, 2017Even unthinned, Ammo paint doesn't like to be brushed21
December 11, 2017Added colour to the pit, seat and dash.22
December 11, 2017Added PE tot the seat.23
December 11, 2017It's a small world....24
December 11, 2017The dash looks good!25
December 11, 2017Me like26
December 11, 2017Me like a lot27
December 12, 2017Fuselage closed28
December 16, 2017Mind the gap29
December 16, 2017Wings glued & positioned30
February 2, 2018Dry fit of the cut canopy. There's some tension that needs to be worked on.31
February 2, 2018On the starboard side is a small dent in the canopy. Will drop a glob of CA on it and then sand.32
May 14, 2018Primed with mr surfacer 120033
May 14, 201834
May 20, 2018The infamous orange masking returns!35
May 20, 2018Prepped the exhaust. Doing those from my Vigilante at the same time.36
May 20, 2018Painted with Alclad37
May 20, 2018Like the result38
May 20, 2018Bit too much contrast39
May 20, 2018Adittional layer of aluminium blends things out40
May 20, 201841
May 20, 2018The demasqué42
May 20, 201843
May 20, 2018Added some yellow ochte with oils and some shine with a 8B pencil44
June 11, 201845
June 11, 2018Inside of the trunk as well46
June 11, 2018mind the GAP!47
June 11, 2018After sanding and filling, paint it black48
June 11, 2018Canopy masked for painting49
June 11, 2018Looks nice doesn't it?50
June 11, 2018Other side doesn't51
June 11, 2018GAP alert!52
June 11, 2018Painted wheel wells Zinc Chromate Green53
June 11, 2018Painted inside of wheel well covers green as well54
June 12, 2018Started pre shading today. Not enough time55
June 15, 2018Rescribed the lower tank. Look at the top one for the why56
June 15, 2018Als added some demarcation lines on the other thingies57
June 18, 2018Painted the underside gunmetal grey58
June 19, 2018Tan first.59
June 19, 2018Greens added60
June 19, 201861
June 19, 201862
June 20, 2018Tha bombs in olive green63
June 20, 2018Wheels painted64
June 20, 2018Undercarriage bits painted as well65
June 22, 2018She needs a black spot on the tip of her nose66
June 22, 2018Portside decalled67
June 22, 2018Starboardside as well68
June 25, 2018Dirty bottom with Tamiya Smoke69
June 25, 201870
June 25, 201871
July 31, 201872
July 31, 201873
July 31, 2018Left panel lines done.74
July 31, 201875
July 31, 2018Measles76
July 31, 2018Measles cured and sealed in matt varnish77
July 31, 201878
August 2, 2018Almost forgot to paint the brake lines black79
August 2, 2018Getting there....80
August 2, 201881
August 2, 2018Al pieces are in place82
August 2, 2018She's done!83
August 2, 201884
August 2, 201885
August 2, 201886
August 2, 201887
August 2, 201888
August 2, 201889
August 2, 201890
August 2, 201891
August 2, 2018
Yorumlar
6 April 2025, 22:04 -
Project info
100 Görüntüler