1/20 SF3D Hornisse/Heinrich/Seefledermaus
Kommentarer
18 23 November 2022, 21:16
Ian Doody
Very slow work in progress on the NITTO/Brickworks 1/20 P.K.A. H1 Heinrich/Rüstsatz. Took all day just to build the leg, mine will have a nicer stance, plastic is very old and brittle, quite like onion skin, peels or snaps in odd ways. And tested out the Brickworks P.K.A H0-1 Rüstsatz parts. Basically better arms, leg armour and clear windows, at some point I'll add weld seams to the body shell.
Very slow work in progress on the NITTO/Brickworks 1/20 P.K.A. H1 Heinrich/Rüstsatz. Took all day just to build the leg, mine will have a nicer stance, plastic is very old and brittle, quite like onion skin, peels or snaps in odd ways. And tested out the Brickworks P.K.A H0-1 Rüstsatz parts. Basically better arms, leg armour and clear windows, at some point I'll add weld seams to the body shell.
23 November 2022, 21:18
Marc Butler
What are you using for the armor texture? Looks like it might be a water based putty.
What are you using for the armor texture? Looks like it might be a water based putty.
24 November 2022, 11:05
Ian Doody
Yep using water based putty for texture, easiest thing to use that I have. Worked really well on my GANS.
Yep using water based putty for texture, easiest thing to use that I have. Worked really well on my GANS.
24 November 2022, 12:22
Ian Doody
I'll be using the Brickworks shouting P.K.A. pilot for the Heinrich. Should look very good.
I'll be using the Brickworks shouting P.K.A. pilot for the Heinrich. Should look very good.
24 November 2022, 14:31
Ian Doody
Legs done on the 1/20 NITTO Heinrich, just dry fitted so far, as I've not decided on pose. Much more natural stance. Brickworks body shell, knee armour and power coupling areas fitted. Looks like I'm building my Hornisse as a Fledermouse though, more about that soon.
Legs done on the 1/20 NITTO Heinrich, just dry fitted so far, as I've not decided on pose. Much more natural stance. Brickworks body shell, knee armour and power coupling areas fitted. Looks like I'm building my Hornisse as a Fledermouse though, more about that soon.
24 November 2022, 19:31
Ian Doody
At the same time as the Heinrich, im turning the Hornisse into a 1/20 NITTO/WAVE PKF 41 SeeFledermaus of the SDR NAVY, flying from the Strahl SuperCarrier SMS Nollendorf. Sits nice and level, I'll turn and raise the front nose gear, as its a NAVY bird. I'll magnetise torpedoes if I make any, and rig suitable hangers. A companion piece to my desert Falke. I still might build my giant Falke versus Hornisse inflight canyon diorama, maybe, possibly.....
This is going to be very good. When it's all closed up you'll see greeblies and wires through the air vents either side of the cockpit. Luckily the top mesh is very hard to see through, but you may make out a glimpse. Definitely a fun project.
At the same time as the Heinrich, im turning the Hornisse into a 1/20 NITTO/WAVE PKF 41 SeeFledermaus of the SDR NAVY, flying from the Strahl SuperCarrier SMS Nollendorf. Sits nice and level, I'll turn and raise the front nose gear, as its a NAVY bird. I'll magnetise torpedoes if I make any, and rig suitable hangers. A companion piece to my desert Falke. I still might build my giant Falke versus Hornisse inflight canyon diorama, maybe, possibly.....
This is going to be very good. When it's all closed up you'll see greeblies and wires through the air vents either side of the cockpit. Luckily the top mesh is very hard to see through, but you may make out a glimpse. Definitely a fun project.
2 December 2022, 02:03
Ian Doody
Adding junk guts to the Seefledermaus, you'll only see them through the airintakes and the rear speed brakes, maybe a hint through the body grills. Saves seeing fresh air straight through the model though, does not matter whether its realistic, I'm going with rule of cool. Filling the void.
Adding junk guts to the Seefledermaus, you'll only see them through the airintakes and the rear speed brakes, maybe a hint through the body grills. Saves seeing fresh air straight through the model though, does not matter whether its realistic, I'm going with rule of cool. Filling the void.
3 December 2022, 16:59
Ian Doody
The beefed up landing gear, i want it to look like the German planes wheels from Raiders of the Lost Ark. also added more greeblies to the insides. Quite lucky that I'm using the wheels, as I think the weight of it would crush the skid undercarriage. When the inside is painted and weathered, probably won't see a lot, but there may be a hint.
The beefed up landing gear, i want it to look like the German planes wheels from Raiders of the Lost Ark. also added more greeblies to the insides. Quite lucky that I'm using the wheels, as I think the weight of it would crush the skid undercarriage. When the inside is painted and weathered, probably won't see a lot, but there may be a hint.
3 December 2022, 17:00
Ian Doody
Also thinking about possibly adding larger fuel tanks? Looks interesting.
Also thinking about possibly adding larger fuel tanks? Looks interesting.
3 December 2022, 17:00
Ian Doody
I always thought the cockpit for the Fledermaus looked kind of nifty. I'll spruce it up with wires and bits of greeblie. Not struck on the plastic "glass" thought, it has a spider web on it, caused by a thin string of molten plastic falling on it when it was formed. It's not massively noticable, but i know its there, So I may create my own frame and windows.
I always thought the cockpit for the Fledermaus looked kind of nifty. I'll spruce it up with wires and bits of greeblie. Not struck on the plastic "glass" thought, it has a spider web on it, caused by a thin string of molten plastic falling on it when it was formed. It's not massively noticable, but i know its there, So I may create my own frame and windows.
3 December 2022, 17:01
Ian Doody
That's enough for today then. Found some parts for Torpedoes, added wiring and plumbing to the cockpit area, just dry fitted. The cockpit area will be plumbed to the main body, even though you can't see it. Looking pretty sweet so far.
That's enough for today then. Found some parts for Torpedoes, added wiring and plumbing to the cockpit area, just dry fitted. The cockpit area will be plumbed to the main body, even though you can't see it. Looking pretty sweet so far.
3 December 2022, 17:01
Ian Doody
It's just like big boys lego, you just sort of know where bits go and what looks good ha 😀
It's just like big boys lego, you just sort of know where bits go and what looks good ha 😀
5 December 2022, 17:18
Ian Doody
Bum end of the beast, quite a big footprint, considering its smaller than a Falke. It's the outriggers that take up the space.
Bum end of the beast, quite a big footprint, considering its smaller than a Falke. It's the outriggers that take up the space.
5 December 2022, 17:18
Ian Doody
Spent today building rocket engines, watching the 1980s Equaliser, and sorting through piles of bits, looking for suitable details.
Spent today building rocket engines, watching the 1980s Equaliser, and sorting through piles of bits, looking for suitable details.
6 December 2022, 15:46
Ian Doody
Stuff you'll never see, part fifty five thousand. Innards of the SeeFledermaus, looks ok. Going to start closing up the hull, after I've added the cockpit. Always have a bits box, those things you think may come in handy one day, will. It's a shame this will all be hidden now... 😔
Stuff you'll never see, part fifty five thousand. Innards of the SeeFledermaus, looks ok. Going to start closing up the hull, after I've added the cockpit. Always have a bits box, those things you think may come in handy one day, will. It's a shame this will all be hidden now... 😔
7 December 2022, 12:04
Ian Doody
Added some more piping to the main engine area. Shall be putting more detail into the thruster bell and engine area too. The wires from the larger fuel tanks will be covered by A springs. I've connected the cockpit to the main body. Last pic shows what it could look like with two Torpedoes.... pretty cool. And that's enough for today.
Added some more piping to the main engine area. Shall be putting more detail into the thruster bell and engine area too. The wires from the larger fuel tanks will be covered by A springs. I've connected the cockpit to the main body. Last pic shows what it could look like with two Torpedoes.... pretty cool. And that's enough for today.
7 December 2022, 15:56
Ian Doody
Nerdgasming with the adult Lego. This for me, is more fun than building an actual kit, almost as much fun as painting and weathering, it's very satisfying when you find the right part and it fits, and looks good where you put it. Awesome stuff.
Nerdgasming with the adult Lego. This for me, is more fun than building an actual kit, almost as much fun as painting and weathering, it's very satisfying when you find the right part and it fits, and looks good where you put it. Awesome stuff.
9 December 2022, 14:39
Ian Doody
And that's it until the new year, when I'll begin painting, finishing off the Torpedoes, small details, and lastly tackling the Cockpit.
And that's it until the new year, when I'll begin painting, finishing off the Torpedoes, small details, and lastly tackling the Cockpit.
13 December 2022, 13:39
Ian Doody
Back in at the deep end after Christmas and the new year. Having fun messing about. With all the added weight, customised rocket engines, and Torpedoes, I'm going to need a big arrestor hook. Even though it can VTOL, it just looks cool, and it's my model. Nothing is glued, just playing with size and placement, I can chop the hook up, turn parts around, whatever I need to. I think I'll move it further back, off the engine bell, like in pic three. I'll scratch some mounts for it, so I can swing it up and down. Very enjoyable build so far.
Back in at the deep end after Christmas and the new year. Having fun messing about. With all the added weight, customised rocket engines, and Torpedoes, I'm going to need a big arrestor hook. Even though it can VTOL, it just looks cool, and it's my model. Nothing is glued, just playing with size and placement, I can chop the hook up, turn parts around, whatever I need to. I think I'll move it further back, off the engine bell, like in pic three. I'll scratch some mounts for it, so I can swing it up and down. Very enjoyable build so far.
14 January 2023, 01:40
Ian Doody
Rear end, radio antenna and fuel, engine plumbing will keep this area busy and interesting to look at.
Rear end, radio antenna and fuel, engine plumbing will keep this area busy and interesting to look at.
14 January 2023, 12:35
Ian Doody
Just to show size comparison between a MK44 RobotBattleV AmmoKnight. Two completely different series, linked by Kow Yokyama. Maschinen Krieger is separate to RBV.
Just to show size comparison between a MK44 RobotBattleV AmmoKnight. Two completely different series, linked by Kow Yokyama. Maschinen Krieger is separate to RBV.
14 January 2023, 12:35
Ian Doody
Toying with the idea of adding an inflight refueling probe? Also I chopped the canopy in half. Still testing fit, alignment and rule of cool.
Toying with the idea of adding an inflight refueling probe? Also I chopped the canopy in half. Still testing fit, alignment and rule of cool.
14 January 2023, 12:36
Villiers de Vos
I am still nailed to my chair. I support the idea of an inflight refuelling probe.
I am still nailed to my chair. I support the idea of an inflight refuelling probe.
15 January 2023, 19:08
Ian Doody
Size comparison with the Space Pirate Torpedo Bomber I'm kitbashing and scratch building, based on a 1/32 revell Phantom.
Size comparison with the Space Pirate Torpedo Bomber I'm kitbashing and scratch building, based on a 1/32 revell Phantom.
16 January 2023, 12:14