Grumman X-29

1
January 7, 2022
This is very old kit so in the beginning the decal sheet was taped on a window so the sun light could remove yellowness.
2
January 7, 2022
Basic cockpit OOB.
3
January 7, 2022
Cockpit and lead weights added to the fuselage half. DON'T DO THIS! CA-GLUE AND LEAD ARE BAD COMBINATION!
4
January 7, 2022
5
January 7, 2022
Smoothing the center seam and very shallow panel lines needed to be scribed again.
6
January 7, 2022
7
January 7, 2022
Air intakes installed.
8
January 7, 2022
9
January 7, 2022
Wings added.
10
January 7, 2022
The engine nozzle needed to be added to help the wing alignment. The nozzle is not glued yet, because it would be easier to paint separately.
11
January 9, 2022
Adding putty to the intake seams.
12
January 9, 2022
Dryfitting the nose. It is offset and the tube needs to be straighten.
13
February 20, 2022
From the left: original kit seat, seat of early F-5 from Pavla models and Martin Baker Mk. GQ-7A from Aires. The kit seat has clearly taken inspiration from MB-seat.
14
June 9, 2022
Finally got back to this one. I tried to add pipes and stuff into landing gear bay.
15
June 9, 2022
Finally got ejection seat painted. Maybe this one was a bit pointless because I want to keep canopy closed.
16
June 23, 2022
17
June 23, 2022
More pitot tubes and canopy in place. My original goal was to get this ready before Midsummer, but I didn't had time from planning my vacation.
18
August 4, 2022
I finally decided to paint the white using white Tamiya fine surface primer spray. It spells awful and comes from a spray can, but it works like a miracle.
19
August 4, 2022
Front landing gear modified to resemble more the real one.
20
August 4, 2022
Painted antiglare area.
21
August 4, 2022
Jet nozzle painted with acrylics before adding it to the fuselage.
22
August 4, 2022
23
August 5, 2022
Time for the decals. I was afraid they would broke easily so I first tested the title decal on a sheet of styrene. It felt quite tough so I proceeded to apply the bottom stribes and canard stribes.
24
August 5, 2022
Finally all decals applied! I'm waiting overnight for Micro Sol to evaporate and then I could finish this.
25
August 6, 2022
It is finally ready!
26
August 6, 2022
27
August 6, 2022
28
August 6, 2022
29
August 6, 2022
30
August 6, 2022
31
August 6, 2022
32
August 6, 2022
33
August 6, 2022
34
August 6, 2022
Really shameful mistake that white area in front of the cockpit under the clear part...
35
August 6, 2022
Cockkpit front area fixed.
36
August 6, 2022

Коментари

56 7 January 2022, 20:17

Maciej Bellos
Watching!

7 January 2022, 20:54

S M
Thanks, Maciej!

7 January 2022, 21:45

Oliver Zwiener
Made this in 2018 - so I will follow 😉 modellversium.de/gal..ototyp-hasegawa.html

8 January 2022, 07:54

S M
Welcome aboard, Oliver! Your X-29 looks very well done. Did you have any problems with the decals? Especially those long stripes?

8 January 2022, 12:37

Neil
👀👍

8 January 2022, 13:15

Robert Podkoński
Watching of course! I assembled one a long time ago...but purchased the next one 😄. I love this plane (and the kit too 😉 )

8 January 2022, 14:19

S M
Thanks, Neil and Robert!

8 January 2022, 18:15

Oliver Zwiener
Yes, unfortunately the decals on the underside of the plane caused some problems with the bulges

8 January 2022, 20:51

Robin (WhiteGlint)
I'm always up for some forward swept wings! 👍
Watching. 🙂

9 January 2022, 18:26

S M
Thanks, WG! 🙂

9 January 2022, 18:34

S M
Not much new here. I have just smoothed some seams, but painting white has been revealed to be more labored. I wanted to add a better ejection seat so I aqquired an F-5's ejection seat (F-5/T-38 (Pavla Models S72017, 1:72)), because this is a Frankenplane. But then I found out that X-29 actually uses a Martin Baker ejektion seat (M.B. GQ 7A Ejection Seat (Aires 7146, 1:72)), so I got more delays.

13 February 2022, 20:57

Łukasz Gliński
Following. attempted to complete it some time ago, but the decals turned out to be quite vulnerable to the decal softeners, namely Micro Sol. You have been warned and I still plan to build another one in the future.

13 February 2022, 21:17

S M
Thanks, Woody! I just removed my decals from my window. Not much yellowness anymore. I will be careful with them.

13 February 2022, 21:54

Robin (WhiteGlint)
This kit seems to be quite some work. 👍
Ah man, seeing your X-29 makes me want to retry my Su-47. 😄

14 February 2022, 19:36

Spanjaard
Seat looks really good

9 June 2022, 22:08

Oliver Zwiener
Top ejection seat !!!

10 June 2022, 10:29

S M
Finally I'm again continuing this after Raccoon. My greatest obstacle was the white color, that I got solved with Tamiya fine surface primer spray. It smelled awful, but worked much better than my acrylics. One great invention was to spray the paint to a cup, pour the paint to my airbrush and so fix some tiny points on the model.

5 August 2022, 18:39

Spanjaard
decals look great.

5 August 2022, 19:31

Łukasz Gliński
Lucky you mate! My decals dissolved when treated with MicroSol. I still promise myself to build it once again 🙂

5 August 2022, 19:35

Maciej Bellos
Looks great!

5 August 2022, 20:29

Robin (WhiteGlint)
👀 👍

6 August 2022, 05:55

Torsten
Looks good so far 👍

6 August 2022, 06:00

S M
Gentlemen, I declare the X-29 is ready! And it is not perfect... The decals were really tricky especially on the leading edge of the wings. My clear varnish had filled many of the panel lines. After removing the mask from the canopy I noticed that I didn't paint the front of the cockpit enough so there is a visible white area...

6 August 2022, 19:09

Spanjaard
Well, looks good from where I stand 😉

6 August 2022, 19:27

Oliver Zwiener
Charles -Chuck- A. Sewell forever !!!

6 August 2022, 20:14