Eat my shorts Hussein
- Масштаб:
- 1:48
- Статус:
- Завершённые
- Начатые:
- July 25, 2020
Состав проекта
Полные наборы
Lockheed Martin
F-16C [Block 25/32] Fighting Falcon Air National Guard ANG Tamiya 1:48
61101 2008 Новые детали Наборы деталировки и конверси
F-16 Fighting Falcon - Static Dischargers (16 Pcs. + 2 Spare)
Master 1:48
AM-48-112 2015 Новая разработка F-16 Fighting Falcon - Pitot Tube & AOA Probes for Tamiya
Master 1:48
AM-48-008 2008 Новая разработка Декали
Gulf War F-16 Nose-art "Max Thrust", "Hooters Standards" & "Eat my shorts Hussein"
Elite Decals 1:48
ED-48005 Маски
/ru/search.php?q=*&fkMATEID[]=11788&showast=no&fkWORKBENCH[]=WB11788&page=projects&project=80639?
Фотоальбомы
Часть моей Коллекция
Комментарии
6 25 July 2020, 12:33
Gidge
With the AGM-65's how did you get the join between the main part and back part of the missile parallel and perfectly lined up?
With the AGM-65's how did you get the join between the main part and back part of the missile parallel and perfectly lined up?
22 May 2021, 10:25
Sven Schönyan
If I remember it right I drilled the parts out so that there was just a edge of about 0,5mm thickness. I then tried to sand it in an right angle as possible and glued them together. Maybe I´ve used the missile rail as a guidance when glueing.
In the aftermath the Reskit Mavericks would have been the better choice. It is the weakest point on Eduard´s Brassin parts that in 1/48 scale some of them are divided like the Mavericks. Joining some Mk82s offered the same problem and didn´t work properly. And their GBU-12 in 1/48 are just horrible to free them from the runner.
If I remember it right I drilled the parts out so that there was just a edge of about 0,5mm thickness. I then tried to sand it in an right angle as possible and glued them together. Maybe I´ve used the missile rail as a guidance when glueing.
In the aftermath the Reskit Mavericks would have been the better choice. It is the weakest point on Eduard´s Brassin parts that in 1/48 scale some of them are divided like the Mavericks. Joining some Mk82s offered the same problem and didn´t work properly. And their GBU-12 in 1/48 are just horrible to free them from the runner.
22 May 2021, 10:39
Sven Schönyan
I painted them after joining them. I left the seeker head glass part seperate and drilled a hole there for a toothstick.
I painted them after joining them. I left the seeker head glass part seperate and drilled a hole there for a toothstick.
23 May 2021, 16:22
Sven Schönyan
Gidge, in pic #4, #5 and #21 you can get a hint of what I´ve done assembling and painting the Mavericks.
Gidge, in pic #4, #5 and #21 you can get a hint of what I´ve done assembling and painting the Mavericks.
25 May 2021, 13:08