Bell X-2

1
December 3, 2022
2
December 3, 2022
3
December 3, 2022
4
December 3, 2022
5
December 5, 2022
Center seam sanded
6
December 5, 2022
Trailing edge of the rudder thinned sharp.
7
December 5, 2022
Some ugly distorted panel detail...
8
December 5, 2022
...now replaced with a round panel line. THIS SHOULD HAVE BEEN RECTANGLE!
9
December 7, 2022
Canopy's fit was semi bad, so I'm trying to smooth it with putty and sanding.
10
December 9, 2022
Thin styrene sheet into landing gear bays.
11
December 9, 2022
Sprue damage on the wing's leading edge
12
December 9, 2022
Filed the hole bigger and filled with styrene.
13
January 16, 2023
I wanted to add some details into the engine.
14
January 16, 2023
15
January 18, 2023
Wings and elevators added!
16
January 18, 2023
I wasn't happy with wing skids due their seam lines so I remade them. Here is a jig.
17
January 18, 2023
New skid made using the jig.
18
January 18, 2023
Landing gears are not glued, but they are being assembled.
19
January 20, 2023
Shortening nose gear
20
January 20, 2023
21
January 20, 2023
22
January 20, 2023
New air data probe
23
January 20, 2023
24
January 20, 2023
Landing gears done waiting for painting
25
January 23, 2023
Painting will be a bit more complicated because I want some steel chipping.
26
January 24, 2023
I applied AK Interactive True Metal Steel wax on various surfaces.
27
January 24, 2023
Rocket engine is painted with Vallejo paints using airbrush.
28
January 27, 2023
Like in Parcivale, white Mr.Surface 1500 with help of Gunze's Leveling thinner
29
January 29, 2023
Other colors painted...
30
January 29, 2023
...And disaster!
31
February 3, 2023
More disasters! Chipping fluid did not work so I had to scratch chips physically. Then I dropped the model...
32
February 3, 2023
Survived from dropping and chipping so now is the moment for decals.
33
February 5, 2023
Rest of decals added. Btw decals were numbered a bit wrong.
34
February 11, 2023
Undercarriage added
35
February 11, 2023
Varnish added and masks removed. I call this done!
36
February 12, 2023
37
February 12, 2023
38
February 12, 2023
39
February 12, 2023
40
February 12, 2023
41
February 12, 2023
42
February 12, 2023
43
February 12, 2023
44
February 12, 2023

Comentarii

75 3 December 2022, 22:45

Finn
Will follow

6 December 2022, 17:45

Robert Podkoński
Watching for sure! I gave up finishing Mach 2 Bell X-2 some time ago...

6 December 2022, 18:14

S M
Welcome, Finn and Podkon! I guess this could be easier than Mach 2 kit, but still not easy kit.

6 December 2022, 21:05

Thomas Espe
👀

16 January 2023, 21:34

Robert Podkoński
Going along nicely!

16 January 2023, 21:48

S M
Yes it is for now. Not many parts left and soon I will get to paint it.

18 January 2023, 21:23

Robert Podkoński
Great! I am waiting for the final result impatiently! 😉

19 January 2023, 06:05

David Liney
Following

20 January 2023, 20:17

S M
Welcome, David! 😄

20 January 2023, 21:00

Guy Rump
Looking good, watching. 👍

29 January 2023, 21:17

Michael Kohl
Nice

11 February 2023, 21:13

Robert Podkoński
Really good work, S M! Makes me think about taking this kit onto the bench... 😉

11 February 2023, 21:37

S M
Thanks, Podkon! The kit required some work, but in the end it is very simple and lets you make some improvements.

12 February 2023, 12:44

Alex K
Very very nice! Your decision to go for a battered look, with the chipping, really adds a lot of dramatic effect - congrats! 👍

12 February 2023, 12:45

Guy Rump
Very nice indeed. 👍

12 February 2023, 14:18

Villiers de Vos
Very nice work.

13 February 2023, 12:01

Mark K
Superb!

29 March 2023, 16:03

S M
Thank you for kind comments! 😄

29 March 2023, 17:00

Neil
Hi S M, agreed... Superb indeed! And a highly interesting full build album. Great work on rescuing the odd minor disaster also, I frequently encounter them too. Usually caused by myself 😂👍

29 March 2023, 20:22

S M
Thanks, Neil! 😄 Disasters are irritating, but luckily my disasters have been reparable. Also the risk is high because I like to experiment something with my models.

30 March 2023, 19:56