Terminator Tundra

1
February 20, 2020
2
February 20, 2020
3
February 20, 2020
4
February 20, 2020
5
February 25, 2020
Housing for the 30mm guns..
6
February 25, 2020
just replaced the handles, not really a necessity
7
February 25, 2020
Construction far from complete, but despite the sidewalls being composed of a lot of parts (4-6 each side...)
8
February 25, 2020
dryfit is.... perfect
9
February 25, 2020
really perfect...
10
March 19, 2020
a new brand for an attempt to make the slat-armor
11
March 19, 2020
The jig is a great help...
12
March 19, 2020
and first one ready
13
March 19, 2020
second one to... due to it being slanted, it didn't fit in the jig, but it worked...
14
March 25, 2020
still a lot to solder...
15
March 25, 2020
these buggers almost got the best of me, but finally I succeeded...
16
March 25, 2020
only the spacerbars to add
17
March 28, 2020
parts for 1 off the headlights....
18
March 28, 2020
19
March 28, 2020
for the final pieces of the slat-armor, I've found that apply a little bit of solder to the connection points worked best.
20
March 28, 2020
the last one...
21
March 28, 2020
still moveable... on to the coneection points to the frame...
22
March 30, 2020
copper rod from a coil is insulated, so after burning this away you have a black rod. This clearcoat prevents easy soldering
23
March 30, 2020
which is easy to clean up
24
March 30, 2020
ready to use, just applied tin and flux
25
March 30, 2020
to make the hinges for the slat-armor, just present the wire through the holes
26
March 30, 2020
add a little flux to the soldering points
27
March 30, 2020
prepare some tine bits of solder
28
March 30, 2020
present them to the soldering points to
29
March 30, 2020
and just heat it up for a short time...
30
March 30, 2020
then cut off the excess... fully workable hinge...
31
March 30, 2020
support brackets for the slat armor
32
March 30, 2020
and drivers/gunners hatches have some spaced armor to
33
April 13, 2020
started removing the originale casted slat armor, to be honest, it doesn't really need replacement
34
April 13, 2020
All removed
35
April 13, 2020
and fits like a glove
36
April 13, 2020
Tried mounting the brackets first, and then the upper pieces... very fiddly and unsatisfying. So the top is soldered as one piece, bottom parts still loose
37
April 13, 2020
and on the model...
38
April 13, 2020
added some wire to the scope
39
April 13, 2020
overall view
40
April 13, 2020
then the TOW-hook holders
41
April 13, 2020
and all armor into place... ready for paint...
42
January 3, 2021
First paint with AK... Too pale
43
January 3, 2021
Much better IMHO
44
January 3, 2021
Started the masking
45
January 3, 2021
Filling the voids
46
January 3, 2021
Unpacking, only one small area that needs attention
47
January 3, 2021
Testfit to extend the contours to the next surfaces
48
January 3, 2021
Testfit to extend the contours to the next surfaces
49
January 4, 2021
50
January 4, 2021
51
January 4, 2021
52
January 4, 2021
53
January 4, 2021
54
January 5, 2021
Test fit so far... this side looks ok
55
January 7, 2021
And removed
56
January 5, 2021
This side has some discrepancies
57
January 5, 2021
58
January 7, 2021
59
January 7, 2021
Turret also done
60
January 7, 2021
Turret also done
61
January 7, 2021
Again some blutack
62
January 7, 2021
63
January 7, 2021
64
January 7, 2021
65
January 7, 2021
66
January 19, 2021
Rear slat armor mounted
67
January 19, 2021
Missiles too
68
January 19, 2021
69
January 19, 2021
70
January 19, 2021

Comentarii

12 20 February 2020, 13:07

20 February 2020, 15:38

Bart Goesaert
Thx, must admit, pretty detailled kit, also the bar armor looks really good, almost a pitty I've ordered a PE replacement

20 February 2020, 17:35

Bart Goesaert
Man, I'm stunned by this kit... I really am... I mean this is Zvezda, and it fits like a glove... Just glued some components, most is dryfit.... even almost no filler (except on 2 places, but that's all...)

25 February 2020, 06:24

Thomas K.
The kits 1/72 from zvezda are very fine! 🙂

25 February 2020, 13:55

Bart Goesaert
Started soldering the first parts of the slat armor yesterday... To everybody, it is not a necessity, the kit parts are very fine and crisp... but ordered these, so i can only try...

19 March 2020, 07:38

Dave Flitton
Brave...

19 March 2020, 14:51

Bart Goesaert
Thx dave...

19 March 2020, 16:03

Bart Goesaert
some more progress, hope to get these done today. Then on to the slat armor for the T-14...

27 March 2020, 07:19

Bart Goesaert
Slat amor complete, on to the connection points for the armor to the hull....

28 March 2020, 07:28

Black Baron
Watching. I love PE.

28 March 2020, 11:10

Brian Eberle
That slat armor looks great, and quite intimidating to create. Same for the headlight assembly. Great job and congratulations

28 March 2020, 11:40

Bart Goesaert
Thx mates for interest. It is intimidating to creatie, but with patience it will work out

28 March 2020, 19:36

Bart Goesaert
soldering complete for this one... hopefully soon assembled and ready for paint...

30 March 2020, 06:55

Sergej I
This is insane... are you a neurosurgent, sir? 😄 👍

30 March 2020, 07:11

Bart Goesaert
Thx mate, nope, closest I came to be a neuro surgeon is neurotic 😉... A lot of time on my hands for now...

30 March 2020, 10:06

Bart Goesaert
on to the choise for the camo: 1: [img1]
2: [img2] 3: [img3]

31 March 2020, 09:35

Sergej I
Vote for 1., splinter baby 🙂

31 March 2020, 12:15

Black Baron
They're all a bit unexciting. No. 2 is my vote.

1 April 2020, 12:07

Bart Goesaert
do you have other options? So far I -'ve only found 5 livreys for this one, and the first is from another version. Another option is the 3-color black grey white...

1 April 2020, 16:16

Thomas K.
protective green from AK is also a option 😉

1 April 2020, 18:36

Bart Goesaert
I know, and sand/green... But also started the T-14 and T-15 from the same brand... Want them all in different camo's, but not the ones that most people choose like the splinters or green...

1 April 2020, 19:15

Bart Goesaert
Ready for primer, finally... most things mounted in dryfit... me happy so far.

13 April 2020, 06:25

Bart Goesaert
hello Thomas, I'm building 5 of these so far, and plain green is for another model

13 April 2020, 06:26

Zsolt Czegle
Awesome so far!

12 May 2020, 18:42

Bart Goesaert
thx Zsolt

13 May 2020, 05:51

Bart Goesaert
Settled on the camo:
[img1]

3 January 2021, 07:42

Bart Goesaert
Test fit of the parts so far...

5 January 2021, 06:26

Maarten Henderieckx
nice camouflage

6 January 2021, 10:00

James C
Very nice work so far Bart👍 I've built several recent releases from Zvezda now (Msta & Koalitsiya) and was very pleasantly surprised by the quality and fit, given how inexpensive they were compared to the likes of Trumpeter & Meng etc. I've been bitten several times in the past by their older re-released Dragon kits which were just plain bad. The difference between the their old and new kits is like night & day.

6 January 2021, 16:51

Bart Goesaert
Thank you guys, these new Zvezda kits are real gems...

Meanwhile ready for the next color...

7 January 2021, 06:57

Bart Goesaert
And applied... me happy

7 January 2021, 21:45

Zsolt Czegle
Looks good! 👍

8 January 2021, 06:51

Bart Goesaert
Busy with the details

19 January 2021, 05:15