WIP - Churchill VII
1
October 15, 2020Wheels2
October 15, 2020Hatch and co-axial gun3
October 15, 2020Rear4
October 15, 2020Front5
October 21, 2020Good looking barrel6
October 21, 2020Way better than the plastic one7
October 21, 2020This part of the turret was one cast piece. The seam line has to go.8
October 21, 2020Stippled some Mr Surfacer 1200 to get a rough surface9
October 21, 202010
October 21, 2020Friul shoes started11
October 21, 2020Glueing parts from the inside can look so much better12
October 21, 2020Unless the TETC seeps through, and you have your fingerprint saved for the ages.13
October 21, 2020Added some mesh on the air intakes. I'm not sure it will be visible when finished.14
October 21, 202015
October 21, 2020Fixed the booboo16
October 21, 2020Dry fit17
October 21, 2020Simulated some damage from bullets and a bigger shot18
October 21, 2020Ready for paint19
October 21, 2020Road wheeeeeeeels!20
October 21, 2020Glued the other halves on a piece of sprue for easier painting. Why on the axle? The end will be visible21
October 21, 2020Various parts.22
October 21, 2020White primer on.23
October 21, 2020Needs an extra layer here and there.24
October 21, 2020Ditto25
October 25, 2020First steps of preshading26
October 25, 202027
October 25, 202028
October 25, 2020Roof needs to be a bit lighter29
October 25, 202030
October 31, 2020Highlights & white added.31
October 31, 202032
October 31, 2020Base colour33
October 31, 202034
October 31, 202035
October 31, 2020Green wheels!36
October 31, 2020The green is a bit too opaque?37
November 16, 2020Friul slipper38
November 16, 2020Both slippers done39
November 17, 2020Tracks burnished40
November 17, 2020A wash using Ammo tracks wash with added rust pigment41
November 17, 2020Added some extra rust pigment in the middle. The lower ‘rails’ has been treated with Gun metal pigment42
November 17, 2020Top left links have been treated with gun metal pigment.43
November 17, 2020Measles. The phtalo blue is too blue and way too much. Next time I’ll use a dark green44
November 17, 2020Measles mostly gone & dry fit45
November 20, 2020Some paint46
November 20, 2020Some gun metal to get a steel wire look47
December 7, 2020Dust!48
March 7, 2021To my surprise, all pieces were glued and decalled. Only some weathering left?49
March 7, 202150
March 7, 2021Enough dust?51
March 7, 202152
March 7, 202153
March 7, 2021
Comentários
28 February 2025, 00:19 -
Project info
59 imagens