Mammoet DAF - Cargo

Bozzer
I'm in, just to see how that trailer goes! That's some ambitious project, right there, brother!

Martin Oostrom
My son printed these parts a while ago and they were in the way on my bench. So I'll be working on the cargo first and then we'll see where it goes from there truck and trailer wise.

Ben M
👀 what a cool subject…

Spanjaard
so now you have access to 3D printers, cool

Bozzer
I couldn't help wonder, what that thing is? I'm guessing that it's some kind of silo? Probably fictional, but not uncommon for unusual things to be carried around the country. I'm definitely all for unusual loads. They keep our hobby, that little bit more interesting.

Martin Oostrom
In game it is called an Industrial Condenser.

Bozzer
Some nifty little hacks, there Martin. Keep them coming 😉

Martin Oostrom
Too bad is will me a one colour beast.
I might try some preshading to see how that turns out…

bughunter
Another level of great scratch work! That will be a unique model 👍

Martin Oostrom
I had some primer left over from the Merc and the Lambo, so why not use it on this one?
And then I couldn't help myself.

Kyle DeHart
Stopping by to watch this too.

Spanjaard
unique, my friend. really looking forward the end result

Jonathon Herring
Gotta love large complex loads. Gonna watch fascinated.

Martin Oostrom
Slow progress. Today I clearcoated the cargo with Zeropaint 2k flat

Bozzer
Just wondering how things are moving, with this project?

Martin Oostrom
Stuck in traffic. There's a slow moving Beetle in front of an on old Australian Truck holding things up.

Spanjaard
LOL

Bozzer
Oddly enough, I have a road at the back of my cave, just like that? The chassis for my Australian Truck, is currently the test bed, for my resin cabs! It does look good, with double hump fenders though 😉

Martin Oostrom
The Aussie truck is done and the Beetles paint is curing.
Now building a new bed for the trailer.

Bozzer
Oh, I'm glued to my seat! Let's go!!!

Martin Oostrom
I do hope that the Mrs will bring some food and drink every now and then. It's going to take a while Bozzer.
Decision time. Do I make my own cross members or do I glue the new bed on top of the old one?

Bozzer
That's a tough call mate.
Personally, I'd go for it and build my own. However, I'd check the time, by building one, and see how long it takes me? Then I'd multiply that, by the amount of cross members, plus the rails and end pieces.
I'd do this because, my time is limited and nobody really looks at the bottom of a trailer?
That being said, I have plans to build some very interesting trailers, in the future, all from scratch!
If time is on your side, go for it. If not, straight on top of the old, works too.

Martin Oostrom
The kit bed has 'just' 21 crossmembers. I think I'll pass on recreating those.

Martin Oostrom
At ESM last Saturday, I met this guy Mark Spiers. He is supplying me with another set of axles and the wheels and such. At a reasonable price, I can get this setup look a bit more 'heavy transport'.

Bozzer
On the Idea picture, your image shows smaller wheels on the trailer, than the truck. Obviously those are offset by the gooseneck. Options for wheels should be available by 3D printing? They'd definitely be steel wheels. Revell have a Heavy Duty Trailer with a beavertail. I can measure those wheels and tyres, if you want that information? That's definitely the way I'd go, for a heavy trailer like that 👍

Martin Oostrom
💡 Yoe mean this one? Heavy Duty Trailer (Revell 07533, 1:25)
The one that's in my stash? And the size of the lower half is just big enough for my cargo? Because I got it out and measured it?
You're a genius Bozzer. It would rearrange my projects a bit, but that's been done before.

Bozzer
Lol, exactly that one, my mate!
May I suggest you make a mould of the wheels, and cast your own? There's enough knowledge in this forum, to help you? But a smart man with a 3D printer, could also help you out 😉

Martin Oostrom
The parts from Mark Spier arrived in the post today. Just like we agreed, with a couple of figurines tossed in.
Mark is a fellow modeller, who doesn't want to let parts go to waste. He has a collection of leftover parts. You can contact him on his email marxpier0512@gmail.com. He just might have the parts you need. Just give it a try.
Full disclosure: I don't get a cent from whatever he charges.

Martin Oostrom
So the switch is made to the Revell Heavy Duty trailer. I got punished right away, more ejection marks than parts. Guess what I did in the last few hours?

Martin Oostrom
Another hour, another question. I removed some wiring/piping. First I intended to replace it with 0.5mm brass rod. But it looks a bit thin. I also have 0.8mm lead wire. More to size, but a bit bendy.
What to use? And what to simulate the clasps with?

Ben M
You can use brass or even paper for the clasps

bughunter
Copper! It is harder then lead. You can glow it to get it more soft.
Foil from a whine bottle, not all are usable. Often the have two alu with clear plastic in between. I often use the removed outer blacked alu.

Bozzer
Bloody hell, I've created a monster!
I agree with bugsy, but you might also have some black plastic tubing, hidden in your other kits? Usually AMT and Revell. See if that works for you?

yngvenett
I really want to keep watching this 😮