Type 2 or more characters for results.
gundam modeling database | zarządzanie magazynem
s!mon
Simon Nagorsnik (s!mon)
AT

1:72 M1A1 Abrams- Anniston Army Depot

Photo 1 of 18

Komentarzy

14 December 2024, 23:06 -

Album info

The idea for this project came to me while reading the new issue of the AK Wornart Collection.
Representing an M1 in this form seemed like a good idea to me;).

It is intended to represent a used M1 that is stored in the Army depot and awaiting for reconstruction.

I used Dragon's M1A1 (7215) for this project.
A somewhat older kit that has its advantages and disadvantages.
If it's cheap, it's still a good choice.
I also used some parts from the Part PE set (P72-125) and an Orange Hobby aluminum gun barrel G72-195).

Some of the PE parts for the storage baskets broke or were lost, that's why I depicted it with the jam storage bins dismantled.
The figure comes from Germania Miniaturen and is a 3d printed item.

I made the base and the tiles myself.
For the tiles, I used Ammo acrylic concrete paste to preserve the structure.
I then applied a thin coat of diluted AK foam sealer and sanded until bits of the paste came out.

That adjusted the grain of the surface a bit and then I painted and weathered everything.

I didn't quite get what I wanted with the painting on the tank itself, but it should be acceptable I think...hopefully...?

18 zdjęć/zdjęcia
1:72
Gotowe
1:72 M1A1 Abrams (Dragon 7215)1:72 M256 120mm L44 barrel (Orange Hobby G72-195)1:72 M1A1 Abrams (Part P72-125)

Wszystkie albumy

Wyświetl wszystkie albumy »