WIP - ‘65 Ford Mustang
1June 12, 2021Mind the gap!
2June 12, 2021
3June 12, 2021
4June 12, 2021
5June 12, 2021Filler!
6June 12, 2021More filler!
7June 19, 2021Chemistry experiment
8June 19, 2021After much filling and sanding: perfection
9June 20, 2021All pieces have taken a bath after filling and sanding
10June 20, 2021Sorted for the next steps
11June 21, 2021Primer on!
12June 21, 2021
13June 21, 2021Panel line need cleaning and the bit of flash n
14June 21, 2021Mould line above the light
15June 21, 2021Front bumper has some putty left
16June 21, 2021Needs cleanup
17June 21, 2021Ugh!
18June 28, 2021Sandied
19June 28, 2021
20June 28, 2021
21June 28, 2021
22June 28, 2021Primed again
23June 28, 2021Tack coat
24June 28, 2021Zero Paint Pagani Huayra Pearl Red
25June 28, 2021
26June 28, 2021Bonnet seems different than te rest?
27June 28, 2021It's just the light!
28June 28, 2021
29June 28, 2021I sanded the mould line before painting. Nothing could be seen when primed...
30June 28, 2021The swirls in the original plastic is also shining through
31June 28, 2021Chassis painted dark grey. Zero Paints Interior Stone Grey
32June 28, 2021Zero Paints semi gloss black
33June 28, 2021Red and black
34June 28, 2021Zero Paints textured blue. Worked really nice.
35June 28, 2021Zero Paints textured cream clogged my 0.4 airbrush immediately
36June 28, 2021The paint the day after, the pigment is a thick, grainy goo
37June 28, 2021These ripples are in the plastic, not in the paint
38June 28, 2021
39June 28, 2021
40July 10, 2021Sanded smooth, again
41July 10, 2021FIlling some holes
42July 10, 2021And some more
43July 10, 2021I didn't like the original panels
44July 10, 2021
45July 10, 2021Zero Paint Grey Primer and filler.
46July 10, 2021
47July 10, 2021Grainy result
48July 13, 2021What happened here? Hint: it involved a sanding sponge
49July 13, 2021Some last minute mr surfacer
50July 13, 2021Some last minute mr surfacer
51July 13, 2021Some last minute mr surfacer
52July 13, 2021The vents were partially filled with primer/filler. Scribed the three on the right. Three to go
53July 16, 2021Tadaa!
54July 16, 2021
55July 16, 2021
56July 16, 2021
57July 16, 2021
58July 16, 2021
59July 17, 2021Two more layers
60July 17, 2021
61July 17, 2021
62July 18, 2021Masked for Silver
63July 18, 2021Ditto
64July 18, 2021Sprayed the silver
65July 18, 2021Masked the silver and started the black
66July 18, 2021Black is here to stay
67July 18, 2021Demasqué
68July 18, 2021“From disaster to personal best” - Spanjaard
69July 18, 2021Stripes continue in the engine bay
70July 18, 2021
71July 18, 2021That rear looks gorgeous
72July 18, 2021The bonnet
73July 18, 2021Inside of the bonnet
74July 30, 2021The rims. Tamiya gloss black with Molotow chrome accents
75July 30, 2021Alclad Candy golden yellow over Molotow chrome
76July 30, 2021
77July 30, 2021
78July 30, 2021
79July 30, 2021Black interior
80August 1, 2021Prepping the booth for clear
81August 1, 2021But first some clear red on the rear lights
82August 1, 2021And some decals
83August 1, 2021More decals
84August 1, 2021And more
85August 1, 2021And more. Dash is a bit oversized
86August 1, 2021And more
87August 1, 2021Chrome trim around the windows
88August 1, 2021
89August 1, 2021Tack coat
90August 1, 2021Tack coat
91August 1, 2021First wet
92August 1, 2021First wet
93August 1, 2021Second wet
94August 1, 2021Second wet
95August 1, 2021Third coat
96August 1, 2021Third coat
97August 1, 2021Third coat - orange peel is here
98August 1, 2021Third coat
99August 1, 2021I'm in love
100August 5, 2021Mr Orangepeel, meet…
101August 5, 2021Mr Shiny
102August 9, 2021Sanded my life away
103August 9, 2021After polishing. Three steps with Tamiya
104August 9, 2021Nice office
105August 9, 2021
106August 9, 2021This needed some work too
107August 9, 20214 is better than 2!
Kommentarer
11 January 2025, 13:16 -
