Tamiya supra
Kommentarer
15 26 December 2020, 01:21
Rod -
Tail lights a little bright but still awesome 🙂 TINY prewired LEDs from ebay
Tail lights a little bright but still awesome 🙂 TINY prewired LEDs from ebay
21 January 2021, 12:57
Rod -
A simple kit, but difficult to get a good result. I did an awful job of one of these 20 years ago, thankfully tamiya was nice enough to re-pop it so I could try again 🙂
A simple kit, but difficult to get a good result. I did an awful job of one of these 20 years ago, thankfully tamiya was nice enough to re-pop it so I could try again 🙂
26 January 2021, 03:13
Dominik Weitzer
superclean result! the wheels looking perfect, the working popup headlights are awesome!
superclean result! the wheels looking perfect, the working popup headlights are awesome!
28 January 2021, 09:35
Rod -
Hehe "switch" is a bit generous. It's 2 tiny wires hidden under the rear bumper. A bit of fiddling with tweezers to turn on!
Hehe "switch" is a bit generous. It's 2 tiny wires hidden under the rear bumper. A bit of fiddling with tweezers to turn on!
7 February 2021, 08:16
Rod -
I'm happy with it 🙂 I might try some smaller wheels. I lowered it 2mm, but it still sits a bit high. I think the rims are (scale) 20".
I'm happy with it 🙂 I might try some smaller wheels. I lowered it 2mm, but it still sits a bit high. I think the rims are (scale) 20".
1 April 2021, 10:42
dddd
Hi, l am currently building this kit and l stuck with fitting the diskbreak in , can you give a further discribition? That will be very helpful . Thanks a lot
Hi, l am currently building this kit and l stuck with fitting the diskbreak in , can you give a further discribition? That will be very helpful . Thanks a lot
15 April 2023, 14:33
Rod -
I don't remember... I know I lowered the ride height. That was easy, I just filed the axle holes in the chassis a couple of mm. I think after lowering, the Tamiya R34 disks will slip into place and can be glued. It wasn't difficult. I guess it depends what parts you have in your junk box.
I don't remember... I know I lowered the ride height. That was easy, I just filed the axle holes in the chassis a couple of mm. I think after lowering, the Tamiya R34 disks will slip into place and can be glued. It wasn't difficult. I guess it depends what parts you have in your junk box.
16 April 2023, 01:43
Rod -
I changed the wheels after taking these pics. It's got fujimi r32 wheels now, they're a bit smaller and the styling suits the era better.
I changed the wheels after taking these pics. It's got fujimi r32 wheels now, they're a bit smaller and the styling suits the era better.
16 April 2023, 01:45
dddd
Thanks for replying! l also pick up r32 (not nismo) wheels except they are from tamiya which are almost the same size as the originak ones. l uploaded some pics in my album to illustrate how l attach the wheel to the shaft.
Thanks for replying! l also pick up r32 (not nismo) wheels except they are from tamiya which are almost the same size as the originak ones. l uploaded some pics in my album to illustrate how l attach the wheel to the shaft.
16 April 2023, 02:17
Rod -
Ah, that is tricky to do. I also have the Tamiya r32 wheels but decided fitting was to hard. I look forward to seeing how yours turns out.
Ah, that is tricky to do. I also have the Tamiya r32 wheels but decided fitting was to hard. I look forward to seeing how yours turns out.
16 April 2023, 05:48
Album info
Tamiya Supra with Aoshima wheels (I don't remember what they're called) and leftover disks/P.E. parts from a tamiya R34. LEDs from ebay powered by 12v lighter battery.