Albums (135)
Alle albums
4 afbeeldingen
Fort Drum 1/7001:700
Yardarms for aerials added, 0.2mm copper wire, base completely soldered
Project: Fort Drum 1941
16 afbeeldingen
Sa-61:72
Added handles and pivot axles. Front fender for lamps made thinner (left vs right)
Project: SAM-6 Antiaircraft Missile
5 afbeeldingen
Su-1001:72
Just some gentle scraping with the tip of a knife
Project: Russian heavies, wwII
4 afbeeldingen
Frigate Yaroslav Murdyi, 20091:700
Breakwater partly broken
Project: Frigate Yaroslav Murdyi, 2009
48 afbeeldingen
Ukrainian Su-27S 1/1441:144
Almost ready, and not only for the nuthouse or optician...
Project: Su-27 Flanker B Ukrainian airforce
6 afbeeldingen
Sea dart, 1/351:35
Still some last details to do and some checks.
Project: GWS-30 Sea Dart & GWS-25 Sea Wolf
25 afbeeldingen
A couple of magach's, 1:72
Mg's soldered... not perfectly aligned at the muzzles, but it's 3 layers and size you can compare with the butchers knif...
Project: Magach's
9 afbeeldingen
17/25-pdr "Pheasant"1:35
Sight... very comprehensive...
Project: 17/25-pdr Anti-Tank Gun 'Pheasant'
17 afbeeldingen
AH-1W1:72
but when checking with the glass parts it becomes another story... the angle is completely off. Need to think hoh to cop...
Project: AH-1W Super Cobra
9 afbeeldingen
Sa-2 Guideline, North Vietnam1:35
Started PE-cabin from eduard... Middle vertical wall is a few mm short
Project: SA-2 North Vietnamese Missile men
4 afbeeldingen
Kashtan1:35
An idea of the set-up I'd like... If it doesn't work out with the smoke, it will be less dramatic...
Project: Kashtan CIWS
8 afbeeldingen
T-15 APC1:72
Almost complete, and ready for primer, only parts missing are for ease of painting
Project: Modern Russian
2 afbeeldingen
General1:72
the jolly threesome... The T-14 and T-15 are giants compared to the Terminator on a basic T-72 chassis
Project: Modern Russian
4 afbeeldingen
T-14 Armata1:72
dryfit of the cupolla.... can be totally disassembled...
Project: T-14 "Armata"
5 afbeeldingen
FREMM CARLO MARGOTTINI F592 Frigate1:700
real version ;-)
Project: FREMM CARLO MARGOTTINI F592 Frigate
3 afbeeldingen
Borgward Wanze1:35
a lot of ejection marks on the inside of the vehicle to be filled, also on the towing hooks etc...
Project: Borgward IV Panzerjäger "Wanze"
20 afbeeldingen
M54 Gun truck Ace of Spades1:35
Started soldering the armored cab
Project: Vietnam Guntrucks
25 afbeeldingen
SIAI-Marchetti SF-260M1:48
a bit of corrections to the tub...
Project: SIAI-Marchetti SF-260M
16 afbeeldingen
Tunguska, W-model 1/721:72
some necessary filling was needed...
Project: Tunguska, 1/72
6 afbeeldingen
P-30 Radar1:72
To obtain the double curvature from the disk I'll try to make it in styrene or PE
Project: P-30 Radar
10 afbeeldingen
M151A2 OREV1:35
redid the hood, removed the paper and added aber tie downs, to make it more convincing
Project: M151A2 OREV
8 afbeeldingen
T-64BM2, Modelcollect, 1/721:72
PE and details added, more to do
Project: T-64BM2 Main Battle Tank
7 afbeeldingen
Tuo Chiang PPG-618 Corvette 1:350
Hull assembled, still need to check whether the pontons have a flush fit
Project: Tuo Chiang PPG-618 Corvette
0 afbeeldingen
EFW C.3605 C+464This album does not contain any images.
1:72
Project: EFW C.3605 Zielschlepp
0 afbeeldingen
EFW C.3605 C+464This album does not contain any images.
1:72
Project: EFW C.3605 Zielschlepp
8 afbeeldingen
EFW C.3605 C+4641:72
hull parts, even the old airfix panellines are small compared to this...
Project: EFW C.3605 Zielschlepp
7 afbeeldingen
Revell P-39D1:32
Wing cut-outs made and dryfit of the flaps, still need to wait till the wings are joined with the hull
Project: P-39D AIRACOBRA
5 afbeeldingen
M-1126 Stryker1:72
removed all necessary details, time to start with filler and adding stuff
Project: M1126 Stryker
28 afbeeldingen
Eduard Fokker Dr.I stripdown 1:72
and it's mega-size, still regretting the airco dh-1 1:144 as stripdown-model
Project: Fokker Dr.I Stripdown
55 afbeeldingen
Rutan Voyager, A-model, 1:72
Complete overview, very small box for such a large aircraft
Project: Rutan Voyager
9 afbeeldingen
Me 262 A and B eduard 1:144
first cockpit getting ready, 3 to go
Project: Me 262 Schwalbe 144
16 afbeeldingen
Sd.kfz 140/1 1:72
Cupola finished and ready to try to clean-up
Project: Aufklärungspanzer 140/1
29 afbeeldingen
SA-8 Gecko/9k33 OSA1:72
tested with black paint to check the seams, looks ok after a few iterations
Project: SA-8 Gecko/9k33 OSA
9 afbeeldingen
JGSDF Maneuver Combat Vehicle1:72
drilled out lifting eyes, replaced handles
Project: JGSDF Maneuver Combat Vehicle
20 afbeeldingen
IDF Sherman Ambulance II1:35
Upper hull mated and started detailing
Project: IDF Sherman Ambulance II
14 afbeeldingen
RF-4E Phantom II, End of the film1:48
flush fit with the green border... 1mm gap on the indicated side
Project: RF-4E Phantom II, End of the film
13 afbeeldingen
D-9R Armored Dozer1:72
Main hull, one solid part, track guides are separate
Project: D-9R Armored Dozer
17 afbeeldingen
Drone sniper1:8
Upper torso... drilled and scraped for sharper result
Project: Mike Jensen's Drone Sniper
7 afbeeldingen
USS Pinckney, Arleigh Burke Class flight IIa1:700
First pe-works, not a novice, but still another level
Project: USS Pinckney DDG-91
27 afbeeldingen
JGSDF Type 74 Tank Winter Version1:35
painted the tracks.... finally
Project: JGSDF Type 74 Tank Winter Version
10 afbeeldingen
Super Tucano Ecuadorian Airforce1:48
some PE on the other side too... still not even halfway...
Project: Ecuadorian EMB-314 Super Tucano