Tamiya F4D-1 Skyray - Build Photos

1
June 27, 2021
In the booth for a coat of primer.
2
July 1, 2021
Pre-shading
3
July 1, 2021
Underside
4
July 7, 2021
Most of the base colors complete.
5
July 7, 2021
Experimented with two-tone exhaust housing.
6
July 7, 2021
Underside.
7
July 7, 2021
Used AK Real Colors, Metal Xtreme, and Tamiya paints.
8
August 2, 2021
9
August 2, 2021
10
August 2, 2021
11
August 2, 2021
12
August 2, 2021
13
August 2, 2021
14
August 2, 2021
15
August 2, 2021
16
August 2, 2021
17
August 2, 2021
18
August 2, 2021
19
August 2, 2021
20
August 2, 2021
The Cottontail Killer
21
August 2, 2021
22
August 8, 2021
Added some grime to the wing walkways.
23
August 8, 2021
24
August 8, 2021
I scratch built a metal collar for the boarding ladder.
25
August 8, 2021
26
August 8, 2021
This is an Eduard A-4 Skyhawk boarding ladder. I had to remove about 12mm to make it the correct height for the Skyray. Both aircraft had no built in way for their pilots to enter and required a ladder (which were almost identical in design).
27
August 8, 2021
The ladder attached to the jet. I am still researching on the correct color for this SQN. Most F4D SQN's had red ladders, but I have seen photos of yellow ones too.
28
August 8, 2021
FOD covers are complete and need to be painted.
29
August 8, 2021
Cockpit detail.
30
August 8, 2021
31
August 8, 2021
The good thing about adding a metal collar for the boarding ladder is that I can either move it or easily remove it from the model.
32
August 8, 2021
The completed NAVPAC. Adding a scratch built umbilical to the underside of the aircraft.
33
August 31, 2021
NAVPAC installed.
34
August 31, 2021
Canopy painted with the help of Montex masks. They were a big help as the molding on the main canopy hood was not crisp and taping was very difficult.
35
August 31, 2021
36
August 31, 2021
37
August 31, 2021
FOD covers painted and installed.
38
August 31, 2021
Boarding ladder painted yellow.
39
September 4, 2021
Completed Skyray!
40
September 4, 2021

Opmerkingen

24 27 June 2021, 21:39

4 July 2021, 08:42

John Schrijver
Its been a while since I uploaded, but the Skyray project is coming along nicely. I have completed all major assemblies, ordnance, and small bits. Decals have been placed and in progress of weathering.

2 August 2021, 02:01

John Schrijver
Finished up weathering and built boarding ladder and FOD covers. Working on canopy and ordnance.

9 August 2021, 16:26

Robin (WhiteGlint)
Really nice build so far. 👍
Is that a pitot tube on a fuel tank?

24 August 2021, 19:53

John Schrijver
The Skyray did not have an inflight refueling capability, so a refueling probe from an A-4 Skyhawk was grafted to the fuel tank to solve the problem.

24 August 2021, 21:51

Robin (WhiteGlint)
Thank you for explaining John. 👍

25 August 2021, 07:30

John Schrijver
No worries - I appreciate the comments.

25 August 2021, 20:34

John Schrijver
I had the project on hold while I waited for paint masks to arrive. My copy of the Skyray did not have crisp canopy frame molding lines, so traditional tape masking was becoming a real pain. I used Montex masks and they worked great.

31 August 2021, 01:31

John Schrijver
It is always satisfying completing a build. The Skyray is one of my favorite early jets and I am happy to add it to my display shelf. I will put together a completed album to show off the final product.

4 September 2021, 19:39