Junkers Ju-86 P-1, RS Models, 1\72

1
June 3, 2018
The contents
2
June 3, 2018
Dry-fitting of main parts
3
June 3, 2018
Dry-fitting of main parts. Check out that nice surface details!
4
June 3, 2018
Dry-fitting of main parts. Check out that nice surface details!
5
June 3, 2018
Dry-fitting of main parts. Check out that nice surface details!
6
June 3, 2018
Assembled half of the cockpit. Smallest PE I've worked with!
7
June 3, 2018
Assembled half of the cockpit. Smallest PE I've worked with!
8
June 3, 2018
Assembled half of the cockpit. Smallest PE I've worked with!
9
June 5, 2018
Interior enclosed.
10
June 5, 2018
Gaps - clsssic short-run kit problem.
11
June 5, 2018
Gaps - clsssic short-run kit problem.
12
June 5, 2018
Gaps - clsssic short-run kit problem.
13
June 5, 2018
Gaps - clsssic short-run kit problem.
14
June 5, 2018
Problem solved with some plastic and putty.
15
June 5, 2018
Problem solved with some plastic and putty.
16
June 5, 2018
Problem solved with some plastic and putty.
17
June 5, 2018
Unbelieveable but true: wings snapped on without a slightest gap!
18
June 5, 2018
Unbelieveable but true: wings snapped on without a slightest gap!
19
June 5, 2018
Unbelieveable but true: wings snapped on without a slightest gap!
20
June 5, 2018
Unbelieveable but true: wings snapped on without a slightest gap!
21
June 5, 2018
Unbelieveable but true: wings snapped on without a slightest gap!
22
June 5, 2018
Unbelieveable but true: wings snapped on without a slightest gap!
23
June 6, 2018
Reinforced the nacelles with spacers and reinforcment powder
24
June 6, 2018
Reinforced the nacelles with spacers and reinforcement powder
25
June 6, 2018
Attached the nacelles! The overal fit of those turned out to be quite good, yet the still need some work around the edges to completely blend in.
26
June 6, 2018
Attached the nacelles! The overal fit of those turned out to be quite good, yet the still need some work around the edges to completely blend in.
27
June 6, 2018
Attached the nacelles! The overal fit of those turned out to be quite good, yet the still need some work around the edges to completely blend in.
28
June 6, 2018
Attached the nacelles! The overal fit of those turned out to be quite good, yet the still need some work around the edges to completely blend in.
29
June 6, 2018
Attached the nacelles! The overal fit of those turned out to be quite good, yet the still need some work around the edges to completely blend in.
30
June 6, 2018
Attached the nacelles! The overal fit of those turned out to be quite good, yet the still need some work around the edges to completely blend in.
31
June 11, 2018
Main bodywork is finished.
32
June 11, 2018
Main bodywork is finished.
33
June 11, 2018
Main bodywork is finished.
34
June 11, 2018
Main bodywork is finished.
35
June 11, 2018
Main bodywork is finished.
36
June 12, 2018
Attached the flaps. A bit difficult operation due to the nature of it's design
37
June 12, 2018
Attached the flaps. A bit difficult operation due to the nature of it's design
38
June 12, 2018
Attached the flaps. A bit difficult operation due to the nature of it's design
39
June 12, 2018
Attached the flaps. A bit difficult operation due to the nature of it's design
40
June 12, 2018
Attached the flaps. A bit difficult operation due to the nature of it's design
41
June 12, 2018
Attached the flaps. A bit difficult operation due to the nature of it's design
42
June 12, 2018
Attached the flaps. A bit difficult operation due to the nature of it's design
43
June 12, 2018
Primed the plane with Tamiya Enamel X-11 Chrome Silver.
44
June 12, 2018
Primed the plane with Tamiya Enamel X-11 Chrome Silver.
45
June 12, 2018
Primed the plane with Tamiya Enamel X-11 Chrome Silver.
46
June 12, 2018
Primed the plane with Tamiya Enamel X-11 Chrome Silver.
47
June 12, 2018
Primed the plane with Tamiya Enamel X-11 Chrome Silver.
48
June 18, 2018
Preshaded
49
June 18, 2018
Preshaded
50
June 18, 2018
Applied a layer of base RLM02, using Gunze Acrylics
51
June 18, 2018
Applied a layer of base RLM02, using Gunze Acrylics
52
June 18, 2018
Applied a layer of base RLM02, using Gunze Acrylics
53
June 18, 2018
Applied a layer of base RLM02, using Gunze Acrylics
54
June 18, 2018
Applied a layer of base RLM02, using Gunze Acrylics
55
June 18, 2018
Applied a layer of base RLM02, using Gunze Acrylics
56
June 20, 2018
Decaled, washed, varnished, demasked
57
June 20, 2018
Decaled, washed, varnished, demasked
58
June 20, 2018
Decaled, washed, varnished, demasked
59
June 20, 2018
Decaled, washed, varnished, demasked
60
June 20, 2018
Decaled, washed, varnished, demasked
61
June 20, 2018
Decaled, washed, varnished, demasked
62
June 22, 2018
63
June 22, 2018
64
June 22, 2018
65
June 22, 2018
66
June 22, 2018
67
June 22, 2018
68
June 22, 2018
69
June 22, 2018
70
June 22, 2018
71
June 22, 2018

Commenti

1 3 June 2018, 17:17

Alec K
Looking great 👍. Following.

4 June 2018, 00:42

Spanjaard
nice cockpit 🙂

4 June 2018, 07:20

Dmitriy Andreeshchev
An update - finished and installed the interior, glued fuselage halves together and solved the gap problem with transparent parts.

5 June 2018, 17:34

Guy Rump
Looking good, glad you solved the transparency gaps issues 🙂

5 June 2018, 19:14

Dmitriy Andreeshchev
Another update: attached the wings. Those were a pleasant surprise - the fit is extremely smooth, just some regular filling&sanding will be required.

5 June 2018, 20:50

Dmitriy Andreeshchev
Update: assembled and attached the engine nacelles. It turned out to be easier and not painful at all)

6 June 2018, 18:59

Cuajete
Good work so far. Following.

6 June 2018, 19:04

Łukasz Gliński
Intereting

6 June 2018, 20:03

Dmitriy Andreeshchev
Update! Finished the main body construction. Only flaps & some small parts left to attach before the test primer shot.

11 June 2018, 13:57

Gordon Sørensen
Nice work so far, Dmitriy!

11 June 2018, 18:58

Dmitriy Andreeshchev
Update: attached the flaps. Very tedious operation, that requires a lot of patience! Just hope that I won't break them off during the painting sequence)

12 June 2018, 10:06

Dmitriy Andreeshchev
Update: primed the plane with Tamiya Enamel X-11 Chrome Silver.

12 June 2018, 15:44

Dmitriy Andreeshchev
Update: main painting process is finished!

18 June 2018, 10:03

Łukasz Gliński
Looks great when painted. And even better with that gin the background😉

18 June 2018, 10:17

Dmitriy Andreeshchev
Update: Decaled, washed, varnished, demasked! Nearly finished. By the way, these flaps are really a pain in the ass - the breaking off nearly on every slight occasion! They look good from the detailing kind of way, but still, their attachment points are very weak and require extreme caution when you handle the model.

20 June 2018, 21:16

Spanjaard
well done!

20 June 2018, 21:48

Alec K
Looking great. Any recommendations regarding the flaps? Does not look like they can be made removable.

21 June 2018, 11:29

Dmitriy Andreeshchev
Thank you, mates! Alec, the only recomendation I can give: before attaching the flaps' hinges (or fixtures, I dunno the right word for their attachment parts), scrape a little line on the attachment points on both the wings and flaps. This is important, because the parts I've mentioned above are PE, therefore they are flat and their attachment points are very, very thin and small, so if you just glue them on the flat surface, this is gonna be a very weak spot. So it's better to prepare some small slots to put this attachment parts in. I hope my advice is understandable, cause my english lacks some specific words) In any case, if you're very cautious and know how to properly work with CA glue, it would be better if you attach the flaps in the very end, because their weak nature gives no opportunity for complex camouflage - their attachment points can't even stand the resistance of the masking tape.

21 June 2018, 19:05

Alec K
Thaks very much for the recommendation Dmitriy. I know what you are talking about, have seen this on other models.

22 June 2018, 01:51

Dmitriy Andreeshchev
An update - finished! Enjoy the photos of the completed model, my friends)

22 June 2018, 22:22

Spanjaard
excellent!

22 June 2018, 23:12