Tachikawa Ki-162-III Sanshoouo-Kai-San
1July 8, 2024Thanks to my He 162A11 -project, I had an extra BMW-engine just for this purpose.
2July 8, 2024Engines joined.
3July 8, 2024For the engines to fit better, the fuselage must be widened 2mm. The landing gear bay is therefore sawn in half.
4July 8, 2024The bigger aircraft needs bigger wings. The easiest way was to cut the Lippisch Ohren off and extend the wing tip.
5July 8, 2024Lots of sanding, smoothing and scribing.
6July 8, 2024There is two 1mm thick styrene sheet between fuselage halves.
7July 8, 2024Fuselage forced together.
8July 8, 2024
9July 8, 2024
10July 8, 2024
11July 8, 2024
12July 8, 2024
13July 8, 2024
14July 8, 2024A new canopy needed to be done. I made a model of the canopy from Super Sculpey.
15July 8, 2024Cockpit is done. Because it is a Japanese plane, the cockpit isn't RLM66 but green.
16July 8, 2024
17July 8, 2024Bigger elevator was left over from Dragon's kit.
18July 8, 2024Painting started. Just basic Vallejo's PU-primers.
19July 14, 2024Lots of masking.
20July 15, 2024I didn't have suitable spare Hinomaru-decals, so I paint them.
21July 15, 2024
22July 15, 2024Some decals added.
23July 25, 2024weathering ongoing
24July 27, 2024Rockets in place. Took from AZ model kit.
25July 27, 2024I didn't put enough noseweight inside during assembly, so I had to fill the nose gear bay with tungsten balls...
26July 27, 2024The model is now ready!
27July 27, 2024
28July 27, 2024
29July 27, 2024
30July 27, 2024
31July 27, 2024
32July 27, 2024
33July 27, 2024
34July 27, 2024
35July 27, 2024
36July 27, 2024
37July 27, 2024
38July 27, 2024
Commenti
23 December 2024, 07:49 -
Album info
What-if Japanese He 162 with twin BMW 003 engine
