gundam modeling database | polc kezelés
the_crack_fox
Rod - (the_crack_fox)
AU

Tamiya supra

Hozzászólások

15 26 December 2020, 01:21
Rod -
Tail lights a little bright but still awesome 🙂 TINY prewired LEDs from ebay
21 January 2021, 12:57
Rod -
A simple kit, but difficult to get a good result. I did an awful job of one of these 20 years ago, thankfully tamiya was nice enough to re-pop it so I could try again 🙂
26 January 2021, 03:13
Christian W
Very clean built - great paintjob! I like the popup light.
28 January 2021, 09:12
Dominik Weitzer
superclean result! the wheels looking perfect, the working popup headlights are awesome!
28 January 2021, 09:35
Pawel W
amazing - lights are doing great job!
7 February 2021, 01:11
Rod -
Hehe "switch" is a bit generous. It's 2 tiny wires hidden under the rear bumper. A bit of fiddling with tweezers to turn on!
7 February 2021, 08:16
Spanjaard
it looks great
1 April 2021, 10:34
Rod -
I'm happy with it 🙂 I might try some smaller wheels. I lowered it 2mm, but it still sits a bit high. I think the rims are (scale) 20".
1 April 2021, 10:42
dddd
Hi, l am currently building this kit and l stuck with fitting the diskbreak in , can you give a further discribition? That will be very helpful . Thanks a lot
15 April 2023, 14:33
Rod -
I don't remember... I know I lowered the ride height. That was easy, I just filed the axle holes in the chassis a couple of mm. I think after lowering, the Tamiya R34 disks will slip into place and can be glued. It wasn't difficult. I guess it depends what parts you have in your junk box.
16 April 2023, 01:43
Rod -
I changed the wheels after taking these pics. It's got fujimi r32 wheels now, they're a bit smaller and the styling suits the era better.
16 April 2023, 01:45
dddd
Thanks for replying! l also pick up r32 (not nismo) wheels except they are from tamiya which are almost the same size as the originak ones. l uploaded some pics in my album to illustrate how l attach the wheel to the shaft.
16 April 2023, 02:17
dddd
How do you think about that?
16 April 2023, 03:14
Rod -
Ah, that is tricky to do. I also have the Tamiya r32 wheels but decided fitting was to hard. I look forward to seeing how yours turns out.
16 April 2023, 05:48
Rod -
The fujimi wheels use polycaps, just like originals.
16 April 2023, 05:48

Album info

Tamiya Supra with Aoshima wheels (I don't remember what they're called) and leftover disks/P.E. parts from a tamiya R34. LEDs from ebay powered by 12v lighter battery.

28 képek
1:24
Befejezve
1:24 Toyota Supra 3.0 GT (Tamiya 24062)1:24 Nissan R34 GT-R and R34 GT-R Z-tune photo-etch set (Crazy Modeler EP0063)1:24 Leonhardiritt Bugel 20 Inch (Aoshima 053829)

Összes album

Összes album megtekintése »