Mosquito NF-Mk.30 in a Matchboxrace
1January 5, 2013Two Roll-Royce Merlin 76s in the making
2January 5, 2013
3January 5, 2013Little scratchwork on the front seat.
4January 5, 2013Some big caps and other stuff is going to fly away.. its going to be smooth.
5January 5, 2013The canopie has gone trough a polish/wax bath.
6January 9, 2013First layer sanded, some more filling needed.
7January 9, 2013Some more filling after the first layer was sanded down.
8January 13, 2013The canopie is masked
9January 13, 2013The real intakes!
10January 13, 2013Had to make my own intakes!
11January 13, 2013The propellers ar cemented (can move)
12January 13, 2013Cemented Wings!
13January 13, 2013The wheels are pained and coat of cler is put on.
14January 13, 2013The wheels are in place, time to put them on the wings!
15January 13, 2013Little "in-toe" but it will do 🙂
16January 13, 2013
17January 13, 2013
18January 13, 2013Some puffy is needed on the gaps at the engine, wings and fuselage!
19January 15, 2013The canopie is cemented in place.!
20January 15, 2013The canopie is cemented in place.!
21January 15, 2013The result, looks ok.. I hope the masking will do 🙂
22January 15, 2013Gray Valejjo Primer on...
23January 18, 2013Preshading for the first time, nog happy with the result. This is the endresult, the firt lines were to wide. I want a better Airbrush, but this one will do untill the money is saved 🙂
24January 18, 2013Model Master 4693 Aircraft Gray on the Mossie´s belly 🙂
25January 18, 2013The masking worked fine, now masking again and spray the topside.
26January 18, 2013First a coat of Modelmaster 4746 Medium Gray than some masking fore the camo. With will be in Model Master 4726 Dark Green.
27January 18, 2013All masking of from the plane, and the plane´s wings and fuselage is done. Now its the fine art like the exaust and props left... and decals and weathering... and...
28January 18, 2013
29January 18, 2013
30January 18, 2013
31January 18, 2013
32January 19, 2013
33January 20, 2013Twin tail light´s painten white and red, used Model color black, white and red
34January 20, 2013Left single red light. Uset Model color black and white. Then red oilpaint that a thinned out with some mineral spirits so the white shine trough.
35January 20, 2013Same technique on the right wing as on the left, but I used green oilpaint intested.
36January 20, 2013All parts is painted now.
37January 20, 2013The doors to the wheelbase in cemented. Soon ready for a layer off clear befor the decals is put in 🙂
38January 20, 2013Gloss coated befor the decals
39January 29, 2013The first decals are in place, using mocro set and sol.
40January 29, 2013The decals were old, and broke, I fixed them a little bit... but they are not perfect 🙁
41January 29, 2013A coat of floor polish för protection. Now its ready for weathering.
42January 30, 2013
43January 30, 2013
44January 30, 2013
45January 30, 2013
46January 30, 2013
47January 30, 2013
48January 30, 2013
49January 30, 2013
Commentaires
26 November 2024, 07:35 -
