Russian 1S91 SURN Kub Radar

Trumpeter | No. 09571 | 1:35

Boxart 1S91 SURN Kub Radar 09571 Trumpeter

faktat

Brändi:: Trumpeter
otsikko:: Russian 1S91 SURN Kub Radar
Määrä:: 09571
asteikko:: 1:35
Tyyppi:: Täysi pakkaus
julkaisi:: 2019 Uusi työkalu
Viivakoodi:: 9580208095714 (EAN)
Pakkaus:: Jäykkä laatikko (ylempi avaaja)
Aihe:: 2K12 Kub » Itsekulkeva tykistö (ajoneuvot)

Contents 1S91 SURN Kub Radar 09571 Trumpeter

Laatikon sisältö

Mitat:
450x290x80 mm (17.7x11.4x3.1 inch)

Paino:
760 g (1.68 lbs)

Tuotteen aikajana

Trumpeter

2019

Uusi työkalu

Koko historia »

Ohjeet

ladata 16604Kb (.pdf)

markkinat

No partner shops available

In-box-arviot

Ulkoiset arvostelut

Rikki linkki David's Modellbaukeller

Kommentit

Vesa-Pekka Palmu
The kit is pretty good, but there are ejector pin marks that need to be dealt with, and some of them are in annoying places to clean. The tracks are link-and-length and also have pretty deep ejector pin marks, on each individual link and few on each length piece, would recommend getting the SA-6 Kub tracks as an aftermarket part.

1 6 November 2021, 09:56

Vesa-Pekka Palmu
And now that I remember I also ran into some fit issues with the hatches on the hull and had to do some slight modifications to one hatch and PE hinges to get them to fit.

6 November 2021, 10:00

Vesa-Pekka Palmu
So check the fit of all hatches before gluing any of them in place.

6 November 2021, 10:00

Treehugger
Pin ejector marks, may be easily fixed, by the following method, which is my favourite: Use Vallejo putty in a hole, then top it like soft ice cream (so that it sticks upwards cancelling any shrinking of the putty as it dries). Wait some time, then use a blade to cut the top flush with the surface, or close enough, then let it dry some more, then maybe sand the surface clean (then the putty should have gone hard after some hours, or a day).

6 November 2021, 11:12