Breda BA 65 A80 - Aviazione Legionaria
Kommentare
11 3 November 2015, 15:05
Cristian Bordina
Surely the worse kit to which I has worked. The quality of the plastic is typical of short run kits. The cockpit is almost completely scratch built.
Surely the worse kit to which I has worked. The quality of the plastic is typical of short run kits. The cockpit is almost completely scratch built.
3 November 2015, 15:29
Stefan Schneider
I am sure you can achieve a good result! Will watch your progress with interest. The kit does not provide the version featuring the machine gun turret correct?
I am sure you can achieve a good result! Will watch your progress with interest. The kit does not provide the version featuring the machine gun turret correct?
3 November 2015, 16:03
Martien Lourens
Very interessting subject, Cristian. You got the interior done. Looks great to me. Well done 👍👍👍 By the next short run model goes scratch building a littlebit easier. 🙂
So if this model is done, you can begin the next short-run model.
Very interessting subject, Cristian. You got the interior done. Looks great to me. Well done 👍👍👍 By the next short run model goes scratch building a littlebit easier. 🙂
So if this model is done, you can begin the next short-run model.
3 November 2015, 16:19
Cristian Bordina
Stefan "good is a big word" as we say in Italy. If the result will be decent I'll do jump of joy 🙂 Yes the RCR kit hasn't the turret. I have chosen the version with the glass on lower surface. It was an hard fretwork 🙂
Stefan "good is a big word" as we say in Italy. If the result will be decent I'll do jump of joy 🙂 Yes the RCR kit hasn't the turret. I have chosen the version with the glass on lower surface. It was an hard fretwork 🙂
3 November 2015, 16:24
Bulldog Scale Models
Great Work Cristian, no pressure but your last models you really raised the bar even more high than usual so I am really looking forward to see it completed. well done.
Great Work Cristian, no pressure but your last models you really raised the bar even more high than usual so I am really looking forward to see it completed. well done.
10 November 2015, 12:54
Cristian Bordina
Thanks Soeren...but from pictures seems that I paint the model with acquerello😉
Thanks Soeren...but from pictures seems that I paint the model with acquerello😉
10 November 2015, 16:23
Martien Lourens
Nice progress and great brushwork at this difficult camo scheme. 👍👍👍
Nice progress and great brushwork at this difficult camo scheme. 👍👍👍
11 November 2015, 07:09
Cristian Bordina
These are the last 2 pictures of this model. I give up!. After one month of trobles on troubles, today the decals are broken in hundred pieces, totally disintegrated. That on fuselage is the only has survived. I've searched on ebay for spare decals without succes, and I decided to raise white flag. 🙁 This kit is revealed worse than I could ever imagine.
These are the last 2 pictures of this model. I give up!. After one month of trobles on troubles, today the decals are broken in hundred pieces, totally disintegrated. That on fuselage is the only has survived. I've searched on ebay for spare decals without succes, and I decided to raise white flag. 🙁 This kit is revealed worse than I could ever imagine.
13 November 2015, 13:57
Martien Lourens
Put the plane a couple month aside. Maybe after a couple of weeks you looks with a other few to the plane. Don't surrender to a piece of plastic!
Put the plane a couple month aside. Maybe after a couple of weeks you looks with a other few to the plane. Don't surrender to a piece of plastic!
13 November 2015, 14:19
Bart Goesaert
Model was coming along nicely... to bad to hear that you will throw in the towel... is there a possibility to obtain aftermarket decals (Tauromodels have some tauromodel.it/inglese/72519.htm, tauromodel.it/inglese/72520.htm), or to spray them on your model?
Model was coming along nicely... to bad to hear that you will throw in the towel... is there a possibility to obtain aftermarket decals (Tauromodels have some tauromodel.it/inglese/72519.htm, tauromodel.it/inglese/72520.htm), or to spray them on your model?
13 November 2015, 15:25
Cristian Bordina
Thank you Bart for the suggest of Tauro decals but for now I'm a little "scoglionato" (a sort of 70% disappointed and 30% angry) as we say in Italy😉 I think that I will follow the advice of Martien, I will put the plane in a box for a while, I will start another kit and one day, perhaps, I'll continue with the Breda 🙂
Thank you Bart for the suggest of Tauro decals but for now I'm a little "scoglionato" (a sort of 70% disappointed and 30% angry) as we say in Italy😉 I think that I will follow the advice of Martien, I will put the plane in a box for a while, I will start another kit and one day, perhaps, I'll continue with the Breda 🙂
13 November 2015, 15:46
Bart Goesaert
I hope this one will get off the shelf of doom and into the showcase... once...
I hope this one will get off the shelf of doom and into the showcase... once...
13 November 2015, 15:52
Moreno Baruffini
Hi Cristian, did you finish the model?
Ho la stessa scatola a casa, se ti servono decals o altro te le posso mandare 😉
Hi Cristian, did you finish the model?
Ho la stessa scatola a casa, se ti servono decals o altro te le posso mandare 😉
15 September 2021, 06:39
Cristian Bordina
Ciao Moreno, sì l'ho finito... sicuramente non è uno dei miei modelli riusciti meglio ahahah... ma è stata un'impresa terminarlo
Ciao Moreno, sì l'ho finito... sicuramente non è uno dei miei modelli riusciti meglio ahahah... ma è stata un'impresa terminarlo
15 September 2021, 08:01
Moreno Baruffini
...E mi hai fatto passare la voglia di inziarlo a breve 😉 Vedremo 😉
...E mi hai fatto passare la voglia di inziarlo a breve 😉 Vedremo 😉
15 September 2021, 11:02