Snake Eyes Build Log
1
January 6, 2019Assembly2
January 6, 2019Prep for painting and priming3
January 6, 2019Basecoated4
January 6, 2019Customized head. Aluminum wire and greenstuff5
January 6, 2019Nope, not good enough. Not happy with this paintjob, it's cruddy. I think I was just impatient.6
January 6, 2019This is the MK1 curing oven, to keep dust (and me) away from parts as they dried.7
January 6, 2019And while I was building the curing oven, I stripped the parts all the way down. Used OxyClean and Windex. Paint came right off, primer was far more stubborn. Took about 5 hours or brushing/scrubbing/scraping.8
January 6, 2019Ok, back to the start.9
January 6, 2019I promised I would slow down, and this drying oven helped me do that. By speeding up each drying phase, I'm more willing to wait.10
January 6, 2019Had to scrape off the factory paint, and file down seam lines on the Katana, which is 1/12 scale action figure surplus.11
January 12, 2019This is a mask i cut out of styrene sheet, for the Ashkirage clan insignia12
January 12, 2019Paint coming off has been a constant problem, still need to slow down even more.13
January 12, 201914
January 12, 2019waterslide decal under the clear lens15
January 12, 201916
January 12, 201917
January 12, 201918
January 12, 201919
January 12, 201920
January 12, 2019Painting done21
January 20, 2019Gloss coated before panel lining and waterslides22
January 20, 2019A truly WTF moment when I discovered this.23
January 20, 2019Prepping for panel lining and waterslides, and this shoulder pad just cracked off. Never seen anything like it.
Коментари
8 September 2024, 05:23 -